Jump to content

Teradek 120 / 320 encoder decoder pair


Recommended Posts

  • Premium Members

I have a Teradek 120 / 320 encoder decoder Pair for sale.

New condition. Comes with 2 d-tap to 2pin lemo cables and

mounting hardware. At b&h it's 2800.

Asking 2300.00

Photo is here:

Teradek 120/320 encoder decoder

 

 

The Teradek Cube 120/320 HD-SDI Encoder/Decoder is equipped with HD-SDI (serial digital interface) input/output, and WiFi, and is suitable for turnkey (ready for immediate use) on-set video monitoring. You can stream HD video over WiFi and then receive the video signal (up to 1080p24) on a small handheld monitor or a professional field monitor connected to the Cube decoder. In addition, the cube encoder/decoder features a line-of-sight (waves traveling straight line) WiFi range up to 300’ (91m).

 

Featuring a setup wizard, the Cube 120/320 HD-SDI Encoder/Decoder web interface simplifies configuration. You can create a network, log on to Cube's web interface, complete the setup wizard, and start streaming video after connecting video to the Cube system. The Cube 120/320 HD-SDI Encoder/Decoder features H.264 High Profile (level 4.1) video compression to offer high video quality at lower bit rates.

 

Downscaling to lower resolutions is possible via a built-in scaler that allows output streaming resolutions of 1080p/PsF, 1080i, 720p, and 480p. Based on available IP bandwidth, you can choose target bit rates (HD - 2 to 4Mbps, SD - sub-1Mbps) and a video resolution as required. The Cube encoder/decoder offers end-to-end latency (time delay) of 1/8-1/2 second.

 

With small size and compact design, the Cube 120/320 HD-SDI Encoder/Decoder can be mounted to a rail system, cage, hotshoe, or camera baseplate. In addition, the encoder/decoder can be used with camera systems such as Red One, Arri Alexa, Panavision Genesis, Canon 5Dii, and Canon 7D. The Cube encoder/decoder requires only 2.5W DC power.

Link to comment
Share on other sites

  • Premium Members

I have a Teradek 120 / 320 encoder decoder Pair for sale.

New condition. Comes with 2 d-tap to 2pin lemo cables and

mounting hardware. At b&h it's 2800.

Asking 2300.00

Photo is here:

Teradek 120/320 encoder decoder

 

 

The Teradek Cube 120/320 HD-SDI Encoder/Decoder is equipped with HD-SDI (serial digital interface) input/output, and WiFi, and is suitable for turnkey (ready for immediate use) on-set video monitoring. You can stream HD video over WiFi and then receive the video signal (up to 1080p24) on a small handheld monitor or a professional field monitor connected to the Cube decoder. In addition, the cube encoder/decoder features a line-of-sight (waves traveling straight line) WiFi range up to 300’ (91m).

 

Featuring a setup wizard, the Cube 120/320 HD-SDI Encoder/Decoder web interface simplifies configuration. You can create a network, log on to Cube's web interface, complete the setup wizard, and start streaming video after connecting video to the Cube system. The Cube 120/320 HD-SDI Encoder/Decoder features H.264 High Profile (level 4.1) video compression to offer high video quality at lower bit rates.

 

Downscaling to lower resolutions is possible via a built-in scaler that allows output streaming resolutions of 1080p/PsF, 1080i, 720p, and 480p. Based on available IP bandwidth, you can choose target bit rates (HD - 2 to 4Mbps, SD - sub-1Mbps) and a video resolution as required. The Cube encoder/decoder offers end-to-end latency (time delay) of 1/8-1/2 second.

 

With small size and compact design, the Cube 120/320 HD-SDI Encoder/Decoder can be mounted to a rail system, cage, hotshoe, or camera baseplate. In addition, the encoder/decoder can be used with camera systems such as Red One, Arri Alexa, Panavision Genesis, Canon 5Dii, and Canon 7D. The Cube encoder/decoder requires only 2.5W DC power.

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...
×
×
  • Create New...