Premium Members Rory_Moles Posted March 10, 2005 Premium Members Report Share Posted March 10, 2005 Looking for used Preston or Scorpio, 1 or 2 motors + aks Im in the UK but will buy from anywhere ! regards Rory Moles Link to comment Share on other sites More sharing options...
Premium Members WillArnot Posted March 11, 2005 Premium Members Report Share Posted March 11, 2005 I am replacing my Preston handset w/ Microwave transmitter, and the MDR-1 motor driver/Receiver. The only AKS i am selling is the on/off run cables for it. 2 x Arri / Moviecam, and 1 x Panavision. No batteries or motors or charger or anything else at this time I am afraid. I have bought a 2nd FI&Z set-up to work as the A or B conventional camera focus system for the job I am on, and want to upgrade my old handset and receiver so that I have the same generation kit. The only thing that is not compatible is run cables, hence their sale too. This Handset (FI + Z w/ microwave transmitter module 1) and MDR-1 are both in excellent working condition, and have been periodically sent in for maintenance and the odd repair. Whenever I have done heavy weather jobs, rain, snow, sand etc I have had production pay for a trip back to the shop for an overhaul of all moving parts and a circuit board wash. Currently the FI + Z handset lists for $2,950.00 The Transmitter Module II lists for $1,450.00 The MDR 2 motor driver lists for $3,450.00 The 2.4GHZ Transceiver and voltage converter you need to make the MDR wireless lists for $1,195.00 Cables: Arri $155 x 2 = $310 Panavision $205 Total price new: $9,560.00 USD My Prices: FI + Z: $2,650 Transmitter Module: $1,150.00 MDR-1: $3,150.00 MDR tranceiver and voltage converter (working volt range 11-30v instead of 23-30v) $895 Cables: FREE My package price: $7,845.00 USD This is an excellent way to get into a Preston system, or if you want to back up the primary modules. Since I will be on a job where I need the gear b/c i'm working I will need a commitment from you in the form of a check for the full amount. Then there will be a 1 week maximum wait time before I can ship out, while I get my replacement gear shipped to me so I am not without a system. I apologize for this but you can verify with anyone here in NYC as to my integrity. Alec Jarnagin and Jamie Silverstein are both friends here in NYC and frequent forum visitors. I never see Prestons for sale. This is a killer deal. I sold one of my lens motor's to BJ McDonnell so you can perhaps e-mail BJ for feedback on the quality of my equipment. I hope that is OK BJ!! All you need to make this a fully functioning system is a power cable from your top stage to MDR, a lens motor cable (you probably want right angles on both ends), a Lens Motor, and a battery and charger for the FI + Z microwave handset. Thank you, Will PS- the handset also comes with the Delrin rings installed for lightening quick lens changes and calibration. 7 rings with the unit. This is another $208 value kicked in for free. You can't go wrong. PPS- buyer pays for shipping. I can't give you everything. Link to comment Share on other sites More sharing options...
Premium Members Rory_Moles Posted March 12, 2005 Author Premium Members Report Share Posted March 12, 2005 OK so now Im looking for a FI+Z NIMH charger, and a Preston motor (preferably DM2) and a 19mm Hill PAM.... anyone got those ? Rory Moles Link to comment Share on other sites More sharing options...
Premium Members Rory_Moles Posted March 19, 2005 Author Premium Members Report Share Posted March 19, 2005 Unfortunately I wont be buying Will's unit, so his is still available ! Rory Moles London Link to comment Share on other sites More sharing options...
Premium Members Guido Lux Posted April 18, 2005 Premium Members Report Share Posted April 18, 2005 Hi Will! Is the unit still there?! Could need a backup for my scorpio!Or maybe the other way around...? Thanx, Guido Lux Link to comment Share on other sites More sharing options...
Premium Members WillArnot Posted April 19, 2005 Premium Members Report Share Posted April 19, 2005 Yup. Still available. Will Link to comment Share on other sites More sharing options...
Premium Members BJMcDonnell SOC Posted April 19, 2005 Premium Members Report Share Posted April 19, 2005 I have to say that the motor I bought from Will is in killer shape. It looks brand new and works like brand new. I am sure that the rest of his gear is just as well taken care of. Again, thanks Will for the motor, it has been working on my rig since I got it. Are you still in San Fran? Come down to So Cal and lets hit up some surf. BJ McDonnell Link to comment Share on other sites More sharing options...
Premium Members WillArnot Posted April 20, 2005 Premium Members Report Share Posted April 20, 2005 Hey BJ, glad it worked out and you are putting it to good use. Still in San Fran until June, then 2 weeks of nights in LA, uggh. Will call when there. Best, Will Link to comment Share on other sites More sharing options...
Recommended Posts