Premium Members Benjamin Treplin Posted September 17, 2013 Premium Members Report Share Posted September 17, 2013 Hi all, I have an annoying issue with my Samurai. When the HD feed runs through my XCS the recorder does not recognise the HD input feed after the Samurai is either switched on or coming back from playback. Replugging the BNC works some times. Rebooting my Decimator (loop-through) does work most of the times. Monitor or HD Tx is fine. Anyone else with similar experiences? Quote Link to comment Share on other sites More sharing options...
Premium Members William Demeritt Posted September 17, 2013 Premium Members Report Share Posted September 17, 2013 How do you have the Samurai connected to the signal flow? Quote Link to comment Share on other sites More sharing options...
Premium Members Robert G. Christman Posted September 17, 2013 Premium Members Report Share Posted September 17, 2013 Yes, I've had the same trouble on a feature a few months ago. Turning off and on, re imputing BNC worked sometimes too. What worked longer term (half a day) would be either changing the Samurai settings completely, turing it off, then on, and changing the settings back. We also re-installed the firmware, which also gave us half a day worth of working correctly. Curious to why. Quote Link to comment Share on other sites More sharing options...
Premium Members Benjamin Treplin Posted September 17, 2013 Author Premium Members Report Share Posted September 17, 2013 How do you have the Samurai connected to the signal flow? Camera signal out -> Decimator loop-through -> XCS -> Samurai https://www.dropbox.com/s/y0gf2da7mgozabv/Foto%2009.09.13%2018%2032%2026.jpg https://www.dropbox.com/s/w9nrh3ezw4slf4v/Foto%2015.09.13%2015%2051%2052.jpg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.