Premium Members Andre Trudel Posted August 6, 2016 Premium Members Report Share Posted August 6, 2016 GPI PRO 2 KIT - GPI Pro 2 sled - D box 3 - D box adjustment tool - 1x Camera plate - VZ Gimbal. Like new - Gimbal tool and a few other extras for the gimbal - Telescoping center post in amazing condition. Kipp handle version - Pro V2 SD upper and lower J boxes. (It’s no secret; there are several reputable companies that do the HD upgrade for a reasonable price) - Pro fixed monitor arm - 3x All three jumper blocks - Rigengineering Battery hanger with AB plates. The ability to move all three batteries fore & aft is amazing especially when using lighter monitors. Achieving dynamic balance is made easier. - Pro Anvil Sled case. Needs to be re-foamed. - Jerry Hill Gorelock 2” with docking clamp (New) - Pro Vest. In great shape with the original Pro logo on the back. I’ve owned it since 2008 with very little use. - 3A Gold springs arm. I bought it in March of 2014. Inspected by Robert Luna and given a clean bill of health. I upgraded to a Pro arm. - Preston - Hand Unit 1 (Newer version with the zoom bargraph and ZS ZR switch.) - Wireless Transmitter - 4x Focus Rings - 1x MDR1 (3 channel Focus, Iris, Zoom) - Pro to MDR bracket for DBox 3 - 1x back up antenna - 1x DM1 motors - 1x motor brackets - 1x Omnishot (Allows you to use Sony style batteries on the HU. The generic batteries and chargers are really cheap.) - 1x Fast Chargers with power cables (Does not work. You can use it for parts or get it fixed) - 2x Preston batteries (They have not been charged in a while but worked last time I check.) - Cables - 1x Motor Cable - 1x Pro power cable to MDR - Run/Stop Cables - 1x Red One Digital MDR Camera Run cables straight to right angle - 2x Arri and movieCam 3 pin RS MDR Camera Run cable - 2x Arri 11 pin Fischer MDR Camera Run cable Arri - 1x Panavision 10 pin Lemo MDR Camera Run cable - 1x 2 pin Lemo MDR Camera Run cable (It’s a 2 pin male/female Lemo) - Digital copy of the Fiz Operating manual - Transvideo Titan Standard Definition 4 channel Transmitter and Receiver Set. B&H still sells this package without cables for $2,659.95. - Transmitter - Receiver - 1-AC adapter to 2 pin Lemo power cable - 1-D tap to 2 pin Lemo power cable - Digital copy of the operating instructions card. You can print it out and laminate the card. - Anton Bauer 2 position charger/power supply - 4x Anton Bauer Dionic batteries (1 holds charge. 3 need to be re-celled) - Blackmagic Design Mini Converter SDI to Analog - 3x Bondhus T handle wrenches for all the necessary adjustments Everything works as it should and is in extremely good condition. This is everything you need to start working tomorrow just add your monitor. I’ve come to the realization that I don’t need two complete kits. Located in Los Angeles, California Price is $30,000 or best offer. andresfilmworks@gmail.com 1 Link to comment Share on other sites More sharing options...
Premium Members Andre Trudel Posted August 13, 2016 Author Premium Members Report Share Posted August 13, 2016 Take a look. https://scontent-lax3-1.xx.fbcdn.net/t31.0-0/p600x600/13958250_10206273688831295_8506198463405519993_o.jpg Link to comment Share on other sites More sharing options...
Premium Members Andre Trudel Posted September 11, 2016 Author Premium Members Report Share Posted September 11, 2016 Thanks for all the interest. This kit has sold Link to comment Share on other sites More sharing options...
Recommended Posts