MoSys L40 remote head with backpan compensation

[brett.mayfield]

Mosys L40 package for sale
L40 package $60000
Wireless $4000
Shipping is additional. Located in Atlanta.

Brett Mayfield - 404.408.5951 12@brettmayfield.com
Trevor White - 678.662.0053 trevorjameswhite@gmail.com
Willing to ship with or without cart. Willing to fly out to demo / tech new owner. Price is somewhat negotiable based on payment method, shipping, need for demo, etc. Cash or check is preferred, but we can talk about it. Feel free to ask any questions about the head or otherwise!

This MoSys L40 is in amazing shape. While it helps to have some familiarity with the system, it is essentially a tech-less remote head and very simple for camera and grip departments to setup, operate, and transport. The head expands vertically and horizontally to accommodate a variety of cameras and builds. The motors are strong enough that nodal and center-of-gravity balance is not necessary. Kill switches on the head allow safe handling of the camera and head without the risk of the controls moving the head (count your fingers!!). The hand-wheels are made of heavy patinated brass and well-balanced. The pan and tilt controls can be tightened and loosened to an operator’s preference. Choice between the Pelican cases in the photos or MoSys custom foam Storm cases (best for shipping and typical transportation).

The package includes the following:

Hardware:
-L40 head with back-pan compensation (1)
-Analog control panel (1)
-MoSys control platform (for attaching to hi-hat) (1)
-Pan and tilt controls (2 total)
-Pan and tilt wheels (2 total)
-Custom 3D printed wheels case (1)
-Custom hi-hat bolted to cart (1)
-Castle nut (1)
-Castle nut wrench (1)
-Camera plate (1)
-Suncast Cart (optional)
-Pelican cases or custom cut foam Storm cases (2)

Cables, power:
-28V inverter (1)
-Kettle power cord (1)
-3-pin 24v XLR cable (2)
-Pan and tilt 8-pin lemo cable (1)
-MoSys control cable, 12-18” (2)
-MoSys control cable 25m (2)
-Custom control cable coupler (1)
-Control cable terminator (2-4)

Wireless control is also available separately, and includes the following:
-Wireless transceiver (2)
-Antennae (2)
-Inverter (1)
-MoSys control cable, 12-18” (2)
-Custom 3-pin XLR to MoSys control cable for block battery operation (2)
-3-pin XLR extension (2)
-Kettle power cable (1)
-Pelican case

Key Features:
• Backpan Compensation – automatically keeps camera face parallel to a scene when jib or crane moves through an arc.
High Payload – 40kg / 88lbs payload and 18kg / 40lbs weight
Top, bottom, and nose mountable
• Incredibly Powerful Motors – 100Nm rated, equivalent to holding 20lbs at the end of a
1m pole, and therefore can hold a camera even out of balance.
• Zero Backlash – uses cycloidal gears, not affected by changes in temperature, no
adjustment required under different loads, and most importantly no juddering under
heavy loads.
• High Speed Precision Movement – pan 180 degrees/second, zero delay, even with the
largest payloads.
• Cable Hole Through Drive Motor – no slip rings required, minimises cable tangles, no
specialist cables required.
• Up to 3 Axis Remote Head – Pan & Tilt axis as standard, Roll axis as an optional module that
can be added on set.
• Single Sided ‘L shape’ Design – easier access, and easier loading and unloading of
camera rigs.-88lb payload