Colin Sato Posted September 30, 2006 Report Share Posted September 30, 2006 OK, I haven't played much with my Jr. recently, and I just dusted it off for a planned shoot this weekend. I hooked everything up and unfortunately, I only have a full white screen on my Jr. display.. I checked that the batteries are in correctly, I changed the batteries, I checked that the camera is outputing video signal (using the same cable hooked to a TV and it is working fine) and now I'm here! Any thoughts? Quote Link to comment Share on other sites More sharing options...
Anthony Graham Posted September 30, 2006 Report Share Posted September 30, 2006 I don't know if it has brightness and contrast from memory but check them first. Also if possible check the wires from the topstage to the monitor havn't come away at any of the solder points or snapped along there length. Ant Quote Link to comment Share on other sites More sharing options...
Colin Sato Posted October 6, 2006 Author Report Share Posted October 6, 2006 I don't know if it has brightness and contrast from memory but check them first. Also if possible check the wires from the topstage to the monitor havn't come away at any of the solder points or snapped along there length. Ant There is no control that I'm aware of :P I guess I'll be disassembling the stage to check the leads there. Logically if the problem were power related, then I'd have no image on the screen and not a full white one. Thanks for the thoughs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.