Premium Members Christopher T. Paul- SOC Posted September 17, 2009 Premium Members Report Share Posted September 17, 2009 Gotta gig tomorrow, and just before packing up I noticed that the 4 pin video/power port is not working. I need this to plug in my Canatrans, as the Decimator is going to the top stage port. Of course, I called Greg Bubb first, and he's always lightning fast to respond- but I gotta be up in a few hours and thought I send a shout out to se if anyone knows how to reset this port, if in fact that's possible... Thanks in advance, CP Quote Link to comment Share on other sites More sharing options...
Premium Members brooksrobinson Posted September 18, 2009 Premium Members Report Share Posted September 18, 2009 Christopher, I don't know how to fix that, but if you are in LA, you can borrow my XCS lower electronics housing for the day if that helps. Give me a call and let me know. I'll be up until midnight. Brooks Robinson 661-287-1555 home 661-904-4788 cell Quote Link to comment Share on other sites More sharing options...
Premium Members Christopher T. Paul- SOC Posted September 18, 2009 Author Premium Members Report Share Posted September 18, 2009 Wow, thanks Brooks. That's a very generous offer. Unfortunately I am in NY. Hope I can return the favor sometime- that's really above and beyond! Chris Quote Link to comment Share on other sites More sharing options...
Premium Members RonBaldwin Posted September 18, 2009 Premium Members Report Share Posted September 18, 2009 I can call and distract Maseo while you switch your leh with his! rb Quote Link to comment Share on other sites More sharing options...
Premium Members Benjamin Treplin Posted September 18, 2009 Premium Members Report Share Posted September 18, 2009 Hi Christopher, Most likely the voltage regulator that supplies this port got fried by the canatrans. The fastest way to repair is to bypass this regulator. I have done that with my LEH and cameraplatform. When you open the LEH you'll find the regulator is on the top board that is right behind the 28V converter. Have a look at the picture. Hope this comes in time. Best Quote Link to comment Share on other sites More sharing options...
Premium Members Christopher T. Paul- SOC Posted September 19, 2009 Author Premium Members Report Share Posted September 19, 2009 Thanks for the help, guys. I spoke to Greg and he will fix. I had to tether a few shots yesterday- but it was no big deal in the end. Thanks again. CP Quote Link to comment Share on other sites More sharing options...
Premium Members Andrew Jansen Posted September 20, 2009 Premium Members Report Share Posted September 20, 2009 Thanks for the help, guys. I spoke to Greg and he will fix. I had to tether a few shots yesterday- but it was no big deal in the end. Thanks again. CP Hey Chris I have an Ultimate on both coasts if you ever need anything !! Andrew Quote Link to comment Share on other sites More sharing options...
Premium Members Christopher T. Paul- SOC Posted September 21, 2009 Author Premium Members Report Share Posted September 21, 2009 Wow, that's a neat trick Andrew! Thanks very much for the offer- I'm sending mine out to Greg today, and should have it by the end of the week. I really appreciate everyone's ability to help out. CP Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.