Premium Members Lars Erik Posted October 15, 2009 Premium Members Report Share Posted October 15, 2009 Sadly I’m selling my Archer sled with custom built battery mount. The rig was bought in November of 2005. Delivered in February from Tiffen in 2006. Only one owner. Never rented out. A great video and light film rig. This is a 12v/24v rig. Batteries are V-lock style. The monitor is the original 7" TFT 700nit monitor with framelines. I’ve had many cameras on this rig. Ranging from RED, SR2, SR3, 416, Aaton 16mm, Sony F-900 w/ Pro35, Panasonic AJ-HPX3700/3000 w/ Pro35, 2/3” video, 1/3” video. 3 different weights are included. These are attached under the battery mount, there is a dovetail there. Weights are there to give you a wider range of desired sled length. But you in most cases, if you don’t want to use them, there is no need. The bottom dovetail can also be used to attach Antlers. Items: Archer rig Docking bracket Allen wrench Extra gimbal screws 7" monitor Low-mode kit Sony video camera bracket Archer dovetail x2 Arm posts x2 - one normal, one long. Long one is 30cm/11.81inches (These are arm posts that Tiffen specially made so you can have a Master/Ultra/G-70 arm if desired.) Cables: Archer 3-pin Lemo to 12v video power cable x2 Archer 3-pin Lemo to 4-pin hirose 12v x1 Archer 3-pin Lemo to RED 12v power cable x1 Archer 3-pin Lemo to 24v power cable x1 Archer 3-pin Lemo to 24v ARRI 435/ST/LT x1 Thin BNC cable x1 NO ARM, NO VEST Selling due to upgrading to U2. Comes in the original black Steadicam flight case. Asking €9000 Buyer pays for shipping. Contact me either by phone +4797194150 or mail, post@steadi.no LE Link to comment Share on other sites More sharing options...
Premium Members Lars Erik Posted October 15, 2009 Author Premium Members Report Share Posted October 15, 2009 more pics Link to comment Share on other sites More sharing options...
Premium Members Lars Erik Posted October 15, 2009 Author Premium Members Report Share Posted October 15, 2009 and more Link to comment Share on other sites More sharing options...
Premium Members Lars Erik Posted October 15, 2009 Author Premium Members Report Share Posted October 15, 2009 one more Link to comment Share on other sites More sharing options...
Premium Members Lars Erik Posted October 15, 2009 Author Premium Members Report Share Posted October 15, 2009 final picture Link to comment Share on other sites More sharing options...
Premium Members chris fawcett Posted October 18, 2009 Premium Members Report Share Posted October 18, 2009 This is a great rig, folks! Link to comment Share on other sites More sharing options...
Premium Members Lars Erik Posted October 19, 2009 Author Premium Members Report Share Posted October 19, 2009 The rig is getting a complete service and check up by official dealer of Steadicam in Scandinavia, Hofmann Teknik AB. www.hofmann.se Also the rig has been wired for HD-SDI, all you need a an HD monitor. LE Link to comment Share on other sites More sharing options...
Premium Members Lars Erik Posted October 20, 2009 Author Premium Members Report Share Posted October 20, 2009 Taken some items off and lowered the price. Items: Archer rig HD-SDI Docking bracket Allen wrench Extra gimbal screws 7" 700nit composite monitor F-bracket Archer dovetail x2 Arm posts x2 - one normal, one long. Long one is 30cm/11.81inches (These are arm posts that Tiffen specially made so you can have a Master/Ultra/G-70 arm if desired.) Cables: Archer 3-pin Lemo to 12v video power cable x2 Archer 3-pin Lemo to RED 12v power cable x1 Archer 3-pin Lemo to 24v ARRI 435/ST/LT x1 Thin BNC cable x1 NO ARM, NO VEST Still comes in the original black Steadicam flight case. Now asking €8300/$12400 Buyer pays for shipping. Contact me either by phone +4797194150 or mail, post@steadi.no LE Link to comment Share on other sites More sharing options...
Recommended Posts