Premium Members Jerry Franck Posted March 22, 2010 Premium Members Report Share Posted March 22, 2010 Hi all, had miss-hap on set yesterday, my M-One motor fell into dry mud and the sandy dirt got into the lemo connector. I cleaned it out as best I could on the spot, using compressed air and orange sticks. But connecting the cable to it later still made the ugly sound of some remaining sand in there... my question: what is recommended to completely clean lemo connectors in situations like these? thanks, Jerry Quote Link to comment Share on other sites More sharing options...
Premium Members Eric Fletcher S.O.C. Posted March 22, 2010 Premium Members Report Share Posted March 22, 2010 my M-One motor fell into dry mud and the sandy dirt got into the lemo connector. I cleaned it out as best I could on the spot, using compressed air and orange sticks.But connecting the cable to it later still made the ugly sound of some remaining sand in there... my question: what is recommended to completely clean lemo connectors in situations like these? CRC Electrical contact cleaner, you can get it at Pep Boys/NAPA/Kragen/Autozone Spray it in while pointing the open end of the connector down Quote Link to comment Share on other sites More sharing options...
Premium Members Jerry Franck Posted March 22, 2010 Author Premium Members Report Share Posted March 22, 2010 CRC Electrical contact cleaner, you can get it at Pep Boys/NAPA/Kragen/Autozone Spray it in while pointing the open end of the connector down cool, thank you eric! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.