Premium Members Chris Hood Posted April 1, 2010 Premium Members Report Share Posted April 1, 2010 Selling a power cable for a modulus transmitter. Cable is in absolute mint condition. This cable was used to improve video quality over the standard modulus cable that ran power AND video. This is ONLY power and has a standard 6 pin hirose on one end and a 3 pin lemo on the other. It is 19 inches in length. I used it on the extra 3 pin power out port on a PRO II upper J box. By doing it this way ( Mostly with Panavision XLs) I was able to separate the power to the modulus and then run video directly from the video tap into the transmitter. By not sending the signal through the sled I always had improved signal strength. Asking $95.00 USD Contact Chris Hood directly at the options below for any questions chris_hood@verizon.net 310-880-2518 Link to comment Share on other sites More sharing options...
Recommended Posts