Björn Köling Posted May 14, 2011 Report Share Posted May 14, 2011 Hi Id like to know how to build an remotestart for an SL-35 (sl-cine arri IIC rebuild) camera. It has a 5pin lemo connector but I dont know if its a momentary or continus switch inside and what pin goes with what. Id like to make an adapter from a bartech. thankyou Björn Quote Link to comment Share on other sites More sharing options...
Premium Members Kar Wai Ng Posted May 15, 2011 Premium Members Report Share Posted May 15, 2011 (edited) It's a 5-pin Fischer. See here: http://www.slcine.com/html/connector.pdf Alternately, you could trigger using the 11-pin Fischer. Triggering is by connecting the remote run pin with the 12V pin. On the 5-pin Fischer, it's pins 2 and 5, on the 11-pin Fischer, it's 7 and 11. It's probably a momentary connection, but that doesn't factor in your cable-making...just try both momentary and continuous settings on your Bartech handunit and see which works. Edited May 15, 2011 by Kar Wai Ng Quote Link to comment Share on other sites More sharing options...
Björn Köling Posted May 23, 2011 Author Report Share Posted May 23, 2011 Thanks, I got it working! Björn It's a 5-pin Fischer. See here: http://www.slcine.com/html/connector.pdf Alternately, you could trigger using the 11-pin Fischer. Triggering is by connecting the remote run pin with the 12V pin. On the 5-pin Fischer, it's pins 2 and 5, on the 11-pin Fischer, it's 7 and 11. It's probably a momentary connection, but that doesn't factor in your cable-making...just try both momentary and continuous settings on your Bartech handunit and see which works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.