Premium Members Norbert von der Heidt Posted October 19, 2011 Premium Members Report Share Posted October 19, 2011 I've just bought a sled that has 12-24v capability so don't need this power up-converter anymore. I'd bought it used some time ago but haven't even used it myself, it looks so clean I'm sure it hasn't seen much service. It's about $800USD new and I'm looking for $350AUD + insured registered postage to where ever you are. Marell - MPC1426 The "On Rig" Converter for 14V Batteries Designed specifically for 12-14V body mounted camera stabilization operators that need to film using the modern high performance camera systems that require 26V or more to operate properly. This unit allows the powering of any standard 24V camera (including the ARRI 435 etc) and has enough in reserve to allow high film speed and cold starting with fresh batteries. Attractively packaged, the MPC1426 has a status indicator that allows monitoring of Battery and converter operation, and also shows error conditions, should a cable go faulty, or the battery is flat. Please note that the MPC1426 provides a regulated 26V supply to the Camera, which is ground referenced. Switch Mode 93% efficient Attractive housing Robust Compact - Easy to fit Powerful - 280W Check Marell for more info at: http://www.marell.co.uk/index.php Link to comment Share on other sites More sharing options...
Premium Members Diego Antonio Sega1 Posted January 23, 2012 Premium Members Report Share Posted January 23, 2012 Hi. Is this item still for sale? Does it works with 24v film cameras and with 26v cameras both? what cable Do I need to connect from this converter to a arri? thanks! Link to comment Share on other sites More sharing options...
Recommended Posts