Jump to content

Titan HD


Recommended Posts

  • Premium Members

I had an issue a few days ago on set.

I am using an Ultra 2 and the camera is the Alexa with the ARRI RAW recorder.

I use the Transvideo Titan HD transmitter.

This has been working great and I have been using it for almost a year now.

The other day, it would not put out a signal that was strong, so we had a guy running along side me with the reciever that was tethered to video village.

Neither the DIT nor I could figure this out, since the next day all was fine again.

The only difference was that I was using gyros on the day that the transmitter did not work well.

Is this coincidence or could it be related ?

Link to comment
Share on other sites

  • Premium Members

I had an issue a few days ago on set.

I am using an Ultra 2 and the camera is the Alexa with the ARRI RAW recorder.

I use the Transvideo Titan HD transmitter.

This has been working great and I have been using it for almost a year now.

The other day, it would not put out a signal that was strong, so we had a guy running along side me with the reciever that was tethered to video village.

Neither the DIT nor I could figure this out, since the next day all was fine again.

The only difference was that I was using gyros on the day that the transmitter did not work well.

Is this coincidence or could it be related ?

 

I´ve the same sled, Ultra2, I worked with Alexa, Titan HD and gyros, and no problems....

I don´t know.

Link to comment
Share on other sites

I had an issue a few days ago on set.

I am using an Ultra 2 and the camera is the Alexa with the ARRI RAW recorder.

I use the Transvideo Titan HD transmitter.

This has been working great and I have been using it for almost a year now.

The other day, it would not put out a signal that was strong, so we had a guy running along side me with the reciever that was tethered to video village.

Neither the DIT nor I could figure this out, since the next day all was fine again.

The only difference was that I was using gyros on the day that the transmitter did not work well.

Is this coincidence or could it be related ?

 

Let me know if you would like to try a boxx system.

 

Mark Walker.

Boxx Communications, LLC

3685 Motor Ave., Suite 120

Los Angeles, CA 90034

Office 310-287-1285

FAX 310-287-1218

Jeff 310-488-1218

Mark 310-963-4469

www.boxxcommunications.tv

Link to comment
Share on other sites

  • 2 weeks later...
  • Premium Members

I had an issue a few days ago on set.

I am using an Ultra 2 and the camera is the Alexa with the ARRI RAW recorder.

I use the Transvideo Titan HD transmitter.

This has been working great and I have been using it for almost a year now.

The other day, it would not put out a signal that was strong, so we had a guy running along side me with the reciever that was tethered to video village.

Neither the DIT nor I could figure this out, since the next day all was fine again.

The only difference was that I was using gyros on the day that the transmitter did not work well.

Is this coincidence or could it be related ?

 

Hi Sanjay.

 

Funny, I had the same experience with my Titan HD system.

The image was fine within 5-10 meters, and then the image became more and more noisy like an old VHS-tape.

The setup was the receiver 4 meters up a alu-truss - with one 10dB Rod and four normal antennas. and the transmitter on the back of the camcorder.

We narrowed it down to, that it must have been some radar-interference from a nearby military base by the harbour, where we were shooting.

I upgraded to the new firmware, and I haven't seen the problem since.

 

I have noticed that there's not as good coverage outside, than inside a building.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...