Premium Members Matt Petrosky Posted December 29, 2011 Premium Members Report Share Posted December 29, 2011 Just got back from a job and I need to do some spring cleaning in December. I'm on the westside of Los Angeles. Local meet-up fine. USA shipping ok on buyer's dime. Cash preferred. PayPal ok. XCS PDL s/n: 187 with PRO-standard Lemo connectors on each end Programmable Digital Level PLUS I'm sure Greg (XCS) can switch these connectors out if you need something different. A few cosmetic scratches, but like all of Greg's stuff, it works great and is built to outlast the operator. Includes: level, 6 long mounting screws (2 + 4 backups), 8 short backup chassis screws, PRO Gen.II mounting Rosette, and hard-copy manual. New price: $2875.00 plus tax, which is $3162.50 in CA. (last time I checked 2010 price?) selling for: $1500 less then half-price in CA!!! listing continues in next post . . . Link to comment Share on other sites More sharing options...
Premium Members Matt Petrosky Posted December 29, 2011 Author Premium Members Report Share Posted December 29, 2011 BOTH SOLD! 2 Jerry Hill GAD1 forks (Gorelock Auto Dock) for 1.5" posts 2 Jerry Hill GAD1 1.500" NEW (unused) docking rings 2 spare screws for docking ring clamps Both of the GAD1 forks are used, but have a long life left in them (I don't abuse my gear). One of the GAD1 forks was cut about 1/4" short on the spud that mounts it into the Hill Balancing Bracket. This brings the sled in a bit closer when docked (I did this to better secure my sled when docked on my cart. It has no effect on the spin-beam or being able to balance the rig. These are NOT complete Gorelock/Hill docking setups, the buyer would still need the Hill BalanceBracket. Also found 2 used 1.487" docking rings (Glidecam?). One is filed down for a 1.500" post, the other is not. I'll throw them in for anyone who buys one/both of these (first come first serve). I do NOT recommend using the un-filed 1.487" ring on a 1.500" post. New the GAD1 forks are $400.00. New the rings are: $85.00. Total $970.00 selling for: $250 for 1 fork + 1 ring + 1 spare screw or $450 for BOTH and everything, BOTH SOLD! listing continues in next post . . . Link to comment Share on other sites More sharing options...
Premium Members Matt Petrosky Posted December 29, 2011 Author Premium Members Report Share Posted December 29, 2011 SOLD! Pelican 1650 new-style, no foam (sort of), no dividers. This case is basically brand new, got it a couple weeks ago, had it custom foamed out, and ended up tearing out the foam and using another case. So I don't need this one. The exterior has few minor scratches (never shipped) and the interior has some residual foam and adhesive which can be cleaned out with Bestine or Goof-Off. Case is so new it still has factory stickers on it, and has no labels or markings from me. I have a piece of slightly used top-foam for this case I can thrown in for free if you need/want it. I can ship on buyer's dime (FedEx Ground shouldn't be too bad), but I don't have original cardboard box, so case would ship as a case. New Pelican 1650 is $195.95 + Tax at Nalpak, which is the cheapest. selling for: $100 SOLD! listing continues in next post . . . Link to comment Share on other sites More sharing options...
Premium Members Matt Petrosky Posted December 29, 2011 Author Premium Members Report Share Posted December 29, 2011 2 Anton/Bauer Proformer Batteries DEAD These cells are shot and the batts will need to be re-celled to be used. $40 for both not my picture, but they not beat-up -- they are used, but no major hits/dings/scratches ______________________________________________________________________________ The following information applies for all the above listed items: You can PM me via the forum, or for a faster response email me: mapcam (at) earthlink.net and as mentioned above: I'm on the westside of Los Angeles. Local meet-up fine. USA shipping ok on buyer's dime. Cash preferred. PayPal ok. Sorry for the crappy phone picts! Thanks and Happy New Years! -Matt Link to comment Share on other sites More sharing options...
Premium Members Matt Petrosky Posted January 15, 2012 Author Premium Members Report Share Posted January 15, 2012 ALL SOLD, THANKS! -Matt Link to comment Share on other sites More sharing options...
Recommended Posts