Premium Members Stewart Whelan Posted April 17, 2012 Premium Members Report Share Posted April 17, 2012 Scorpio Remote focus system for sale. Recently upgraded with new radio card and firmware Ver. 5.30 Every Bracket and cable configuration imaginable. Hand unit MDR 2 Preston antennas 3 Digital motors 5 Motor brackets 19 Focus rings Panavision 4 Motor cables including right angle –green 1 Preston/Scorpio motor cable 2 x 10’ Pana cable XLR with Scorpio camera switcher (Lemo/Fisher) 2 Pana power (Large fitting) to 2 pin lemo cable (very short cable) 2 Pana command (on/off) driver cable 3x 3 pin Donkey box power (11/30vdc) to 24V Pana Lemo 1 Panavision focus gear 1 48 pitch gear (Panavision Zoom) 1 64 pitch gear (Panavision Iris) Hex screws Kip screws 12 Sony Lithium Hand unit batteries 2 Sony Lithium Hand unit battery charger with cable 3 Arri bushings (blue) 6 Panavision bushings (brass) 1x .89mm Allen key for scorpio motor 1 Panavision motor focus bracket -(slides into Front body focus mount) 1 Donkey box/shoe bracket -(slides onto lens light bracket) 1 Support rod motor bracket -(slides onto Pana zoom rod bracket) 1 silver 2 ½” 15mm rod 1 silver 3 ¼” 15mm rod 1 silver 4” 15mm with 3/8 – 16 threaded stud rod 2x 2” Blk female/female 1x 2” 90* offset female/female Arri 2x 3 pin Fisher to Arri 3 pin R.S. power cable (on board 11/30 vdc) -yellow 1 Hand set to Donkey box cable “0” setting –red/white 2x 4 pin XLR to Donkey box power cable (11/30 vdc) –brown 1 Arri control cable BL-IV SRII Arri III 2 Arri 535/435/SR3 Command cables (camera run on/off) –blue 1 Handset power cable to 4 pin block battery 2 Scorpio power 12v 2 Arri run/stop Digital Cameras 2 x RED Epic start/stop 2 x Sony F900/ F35 Start/Stop Motion Generator Includes: o Encoder with locking arm and maffer clamp assembly (cable end attaches to Scorpio MDR) o 24ft Kevlar belt (runs along dolly track) o 2 modified maffer clamps (for the Kevlar belt) o 2nd full size pelican case A great value at nearly half the original cost, with thousands of dollars worth of cables and specialized machined brackets. Asking $18,000 Contact stewartwhelan@mac.com Link to comment Share on other sites More sharing options...
Premium Members Brice Reid Posted April 18, 2012 Premium Members Report Share Posted April 18, 2012 would you sell some of your brackets separate? Link to comment Share on other sites More sharing options...
Premium Members Stewart Whelan Posted April 23, 2012 Author Premium Members Report Share Posted April 23, 2012 would you sell some of your brackets separate? Hi Brad, Sorry no, I want to sell it as a complete kit. Stewart Link to comment Share on other sites More sharing options...
Recommended Posts