Premium Members Osvaldo Silvera SOC Posted September 26, 2012 Premium Members Report Share Posted September 26, 2012 Hi folks. I'm on a job with an Archer 2. Had a cable made up to go from the 8pin Lemo Monitor out at the bottom to feed 12V xlr power, bnc composite, and a Tally LED to velcro above the Marshall Monitor. Above the sled I have the Tiffen Tally sensor connector with the photo sensor and the multipin connector that plugs into the front of the front box. However, its working backwards. When the sensor gets a light the tally down below turns off, and vice versa. Sent the cables back and the two cables work just as they should on a work table. If someone would be so kind as to take their archer sled with 1 battery to Terry's place in Redondo beach I would really appreciate it, Id be more than happy to cover gas and lunch or something. If the system works fine on your archer 2, then the sled here has a problem, if it works the same as with mine, then its a cable thing. Either way it would help get to the solution. Call me if you can swing this. Ozzie 305 216 8395 Quote Link to comment Share on other sites More sharing options...
Premium Members Michael Hauer Posted September 27, 2012 Premium Members Report Share Posted September 27, 2012 If there is someone in the New York area that can do the test I'd be willing to help you out. Hi folks. I'm on a job with an Archer 2. Had a cable made up to go from the 8pin Lemo Monitor out at the bottom to feed 12V xlr power, bnc composite, and a Tally LED to velcro above the Marshall Monitor. Above the sled I have the Tiffen Tally sensor connector with the photo sensor and the multipin connector that plugs into the front of the front box. However, its working backwards. When the sensor gets a light the tally down below turns off, and vice versa. Sent the cables back and the two cables work just as they should on a work table. If someone would be so kind as to take their archer sled with 1 battery to Terry's place in Redondo beach I would really appreciate it, Id be more than happy to cover gas and lunch or something. If the system works fine on your archer 2, then the sled here has a problem, if it works the same as with mine, then its a cable thing. Either way it would help get to the solution. Call me if you can swing this. Ozzie 305 216 8395 Quote Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted September 27, 2012 Author Premium Members Report Share Posted September 27, 2012 Thanks for the offer, but the Cables in question are at Terry's place. I appreciate it. Quote Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted September 28, 2012 Author Premium Members Report Share Posted September 28, 2012 Have a friend grabbing the cables and taking them to Steadicam to be checked out. all set, thanks. Ozzie Quote Link to comment Share on other sites More sharing options...
Premium Members Peter Abraham Posted October 4, 2012 Premium Members Report Share Posted October 4, 2012 Ozzie, any update here? Quote Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted October 4, 2012 Author Premium Members Report Share Posted October 4, 2012 Still working on it. The folks at Steadicam took a look at the cables, Said their sensor cable is working as it should. But they could not get the lower end cable to light up at all. I find it odd since it worked fine at Terry's, then with me it worked and lit up, only backwards, even though it's wired just like the diagram on the Steadicam Archer 2 manual states. I asked the service rep at Steadicam, that if the lower cable I provided did not work, then I'd like to know what they offer as a lower tally light. I was told they Do NOT have anything for the lower part of the sled with a Tally light. Now, to be clear, this Steadicam Archer 2 I'm working with was bought with the upgraded Steadicam branded Marshall 7" HD/SDI monitor. But this Marshall monitor does not have a Tally light built in like other Marshalls do. So it's amazing Steadicam does not offer a cable to power the monitor, provide composite video and a Red Tally LED one can velcro or otherwise attach to the top of the monitor. They're missing out on Hundreds of dollars! Cable is now on it's way to Terry, we'll get it working, no doubt about that. Now if I can only get my employer to provide me a return monitor...... Ahhh the Latin live world. Quote Link to comment Share on other sites More sharing options...
Premium Members Rob Vuona SOC Posted October 5, 2012 Premium Members Report Share Posted October 5, 2012 Just sent you a text with a solution Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.