Premium Members Michael Wilson Posted November 1, 2012 Premium Members Report Share Posted November 1, 2012 I picked up a cinetronic yoke. I have a marshall vlcd 6.5" monitor. Their is considerable space between the edge of the monitor and yoke. I need to get a small bracket that fits on the sides of the monitor and bridges that gap and accepts the yoke's screws on the sides. Can anybody point me to someone in LA who could help me out with this? Quote Link to comment Share on other sites More sharing options...
Premium Members Michael Wilson Posted November 1, 2012 Author Premium Members Report Share Posted November 1, 2012 Problem Solved Quote Link to comment Share on other sites More sharing options...
Premium Members Victor Lazaro Posted November 4, 2012 Premium Members Report Share Posted November 4, 2012 How did you solved this? Quote Link to comment Share on other sites More sharing options...
Chris Callarman Posted November 5, 2012 Report Share Posted November 5, 2012 Any chance you can post a picture of your solution. By the way, how much did the yoke cost? Quote Link to comment Share on other sites More sharing options...
Premium Members Michael Wilson Posted November 7, 2012 Author Premium Members Report Share Posted November 7, 2012 I had two delron spacers put on either side of the monitor that tied into the monitor screw holes to fill the gap. Mike Skipps did an amazing job constructing those. Highly recommended. The yoke is pretty big actually. Seems more ideal to cut the yoke down to size. I'll post a pic later. The yoke cost $265. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.