Premium Members Osvaldo Silvera SOC Posted January 15, 2014 Author Premium Members Report Share Posted January 15, 2014 BFD Dual Bracket -SOLD MARSHALL HD/SDI- SOLD Silveratray -SOLD PRO Cinema HD Electronics-SOLD XCS Super post-SOLD Kamio Kino FLo Power supply- SOLD BOXX cobalt TX/RX SD ( Standard Definition) system $400 Zoom Risers $55 Transvideo Super bright 4" starlite SD with PRO cable $475 Transvideo Adapter slider plate. $55 shipped. BFD Run cable 11 pin fisher connector 26" Long $75 Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable $90 shipped ( Cable costs more than that ) NOS ( New old stock) Bolex Rubber Eyecup $15 Vintage Arriflex camera Lapel/Tie pins $20 Pro GPI Gen 1 recorder bracket plate $25 XCS camera plate $275 XCS Alexa adapter plate Attaches to the bottom of the ARRI BPA-1 camera plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity $360 XCS/BPA for ARRI Alexa Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates. $150 XCS Dual Rod Telescoping Monitor Support Arm for 2" Post. Two rail system, Quick release hinged center post clamp for flipping the monitor for low mode. The posts on this bracket were shortened so that it has 4" of travel, not the standard 5.5". The standard length was too long for me and interfered with the batteries in the rear of the sled. This shortening was done by Greg Bubb himself. Orient-able center post clamp, safety stops on rails. Standard with Kipp handles. $700 XCS standard Gimbal arm $700 If you need pictures of any of the XCS stuff let me know. It's all in wonderful shape. Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted January 24, 2014 Author Premium Members Report Share Posted January 24, 2014 BFD Dual Bracket -SOLD MARSHALL HD/SDI- SOLD Silveratray -SOLD PRO Cinema HD Electronics-SOLD XCS Super post-SOLD Kamio Kino FLo Power supply- SOLD BOXX cobalt TX/RX SD ( Standard Definition) system SOLD Zoom Risers $55 Transvideo Super bright 4" starlite SD with PRO cable $475 Transvideo Adapter slider plate. $55 shipped. BFD Run cable 11 pin fisher connector 26" Long $75 Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable $75 shipped ( Cable costs more than that ) NOS ( New old stock) Bolex Rubber Eyecup $15 Vintage Arriflex camera Lapel/Tie pins $20 Pro GPI Gen 1 recorder bracket plate $25 XCS camera plate $275 XCS Alexa adapter plate Attaches to the bottom of the ARRI BPA-1 camera plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity $350 XCS/BPA for ARRI Alexa Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates. $140 XCS Dual Rod Telescoping Monitor Support Arm for 2" Post. Two rail system, Quick release hinged center post clamp for flipping the monitor for low mode. The posts on this bracket are 5.75" long. The standard length was too long for me and interfered with the batteries in the rear of the sled. This shortening was done by Greg Bubb himself. Orient-able center post clamp, safety stops on rails. Standard with Kipp handles. $700 XCS standard Gimbal arm $700 If you need pictures of any of the XCS stuff let me know. It's all in wonderful shape. Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted February 1, 2014 Author Premium Members Report Share Posted February 1, 2014 BTTT. Have a great weekend folks! Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted February 8, 2014 Author Premium Members Report Share Posted February 8, 2014 Stuff still left and available. Silvera Gimbal arm Zoom Risers $55 Transvideo Super bright 4" starlite SD with PRO cable $475 Transvideo Adapter slider plate. $55 shipped. BFD Run cable 11 pin fisher connector 26" Long $75 Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable $75 shipped ( Cable costs more than that ) NOS ( New old stock) Bolex Rubber Eyecup $15 Vintage Arriflex camera Lapel/Tie pins $20 Pro GPI Gen 1 recorder bracket plate $25 XCS camera plate $250 The rear of this plate has been drilled and tapped to store a 3/8-16 camera screw ( 3/8-16 Screw not included) XCS Alexa adapter plate Attaches to the bottom of the ARRI BPA-1 camera plate or to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity $350 XCS/BPA for ARRI Alexa Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates. $130 XCS Dual Rod Telescoping Monitor Support Arm for 2" Post. Two rail system, Quick release hinged center post clamp for flipping the monitor for low mode. The posts on this bracket are 5.75" long. The standard length was too long for me and interfered with the batteries in the rear of the sled. This shortening was done by Greg Bubb himself. Orient-able center post clamp, safety stops on rails. Standard with Kipp handles. $650 XCS standard Gimbal arm $600 If you need pictures of any of the above items not pictured in the beginning post or of the XCS stuff let me know. It's all in wonderful shape. Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted March 4, 2014 Author Premium Members Report Share Posted March 4, 2014 BTTT Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted March 19, 2014 Author Premium Members Report Share Posted March 19, 2014 Stuff still left and available. Silvera Gimbal arm ZoomRisers $55 Transvideo Super bright 4" starlite SD with PRO cable $475 Transvideo Adapter slider plate. $55 shipped. BFD Run cable 11 pin fisher connector 26" Long $75 Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable $75 shipped ( Cable costs more than that ) NOS ( New old stock) Bolex Rubber Eyecup $15 Vintage Arriflex camera Lapel/Tie pins $20 Pro GPI Gen 1 recorder bracket plate $25 XCS camera plate $250 The rear of this plate has been drilled and tapped to store a 3/8-16 camera screw ( 3/8-16 Screw not included) XCS Alexa adapter plate Attaches to the bottom of the XCS/BPA plate. Attaches to the front and rear of the camera for maximum rigidity $350 XCS/BPA for ARRI Alexa Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates. $130 XCS standard Gimbal arm $600 Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted April 5, 2014 Author Premium Members Report Share Posted April 5, 2014 Stuff still left and available. Silvera Gimbal arm ZoomRisers $55 Transvideo Super bright 4" starlite SD with PRO2 power/video cable $425 Transvideo Adapter slider plate. $55 shipped. BFD Run cable 11 pin fisher connector 26" Long $75 Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable $75 shipped ( Cable costs more than that ) NOS ( New old stock) Bolex Rubber Eyecup $15 Vintage Arriflex camera Lapel/Tie pins $20 Pro GPI Gen 1 recorder bracket plate $25 XCS camera plate $230 The rear of this plate has been drilled and tapped to store a 3/8-16 camera screw ( 3/8-16 Screw not included) XCS Alexa adapter plate Attaches to the bottom of the XCS/BPA plate. This particular one is modified to work with the Alexa Studio as well. Attaches to the front and rear of the camera for maximum rigidity $320 XCS/BPA for ARRI Alexa Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates. $120 XCS standard Gimbal arm $500 Â Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted April 10, 2014 Author Premium Members Report Share Posted April 10, 2014 BTTT Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted May 3, 2014 Author Premium Members Report Share Posted May 3, 2014 BTTT, Also available XCS camera plate $230 Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted May 18, 2014 Author Premium Members Report Share Posted May 18, 2014 XCS Camera Plate $210 Silver   XCS/BPA for ARRI Alexa Replaces the standard ARRI BPA plate with one that allows placement over a wide range of positions on the XCS camera plates. $120 Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable $50 shipped ( Cable costs more than that )  NOS ( New old stock) Bolex Rubber Eyecup $15 Vintage Arriflex camera Lapel/Tie pins $20 Pro GPI Gen 1 recorder bracket plate $25  XCS Alexa adapter plate Attaches to the bottom of the XCS/BPA plate. This particular one is modified to work with the Alexa Studio as well. Attaches to the front and rear of the camera for maximum rigidity $320 Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted May 27, 2014 Author Premium Members Report Share Posted May 27, 2014 XCS Alexa Plate SOLD XCS BPA plate SOLD Still available... XCS Camera Plate Silver Color, Fantastic Shape! $200 Shipped XCS Standard Gimbal Arm with a set of Gimbal yoke black side caps $500 shipped Link to comment Share on other sites More sharing options...
Premium Members Osvaldo Silvera SOC Posted June 23, 2014 Author Premium Members Report Share Posted June 23, 2014 Silvera Gimbal arm ZoomRisers $55 NEW Transvideo Super bright 4" starlite SD with Artificial Horizon and PRO cable $400 in OEM Transvideo pelican Transvideo Adapter slider plate. $55 shipped. BFD Run cable 11 pin fisher connector 26" Long $75 Sony XC-57 B&W SD box Camera with PRO 4 pin Lemo Vid/Pwr cable $75 shipped ( Cable costs more than that ) NOS ( New old stock) Bolex Rubber Eyecup $15 Vintage Arriflex camera Lapel/Tie pins $20 Pro GPI Gen 1 recorder bracket plate $25 XCS standard Gimbal arm $500 Paralinx Arrow HD Tx and Rx Standard Not the +, with Crossbow HD/SDi to HDMI box, and the D Tap power cable + all the cables that normally come with it., i.e. Remote, IR cable, USB adapter, Female HDMI Coupler, etc.. $850 complete shipped in the US. Titan SD system Tx, Rx, with 3db, 6db and 9db Tx antennas and power cables with OEM pelican $650 Shipped to the US. Ch14 Video SD Transmitter with Antenna and PRO power/video cable. $75 Shipped to the US. Red Byte Decimator 2 with AC adapter and the little red plate for mounting on stuff. No other cables included. I have two and selling one of them. works perfect. $400. shipped to the US. Email me if you need any other info or pictures. Thanks, Ozzie@silverafilm.com Link to comment Share on other sites More sharing options...
Recommended Posts