Matthew Modica Posted October 31, 2013 Report Share Posted October 31, 2013 Hey all I have searched and read other posts on how to run your fiber jumper from camera to vest so it wont effect the camera but am confused and struggling to find a system that works for me. I currently run the fiber out the back of the camera, immediately tucked under the plate and taped off just before reaching the post. Then i let some slack dangle and feed the rest over my right shoulder (I operate normal not goofy). Now i put the rig on, do a few tweaks in missionary and all is well. The problem is when i change my relationship with the rig in a tracking shot the side to side goes quite a bit off. The only way i seem to work around this is to have a very fast drop time so the rig ignores the subtle change in the cables new relationship with the rig. Should mention that i ensure no twists are in the jumper cable, and the rig is a clipper. Hope i made that clear! Thanks, Matthew Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.