Cinetronic/Cinelive Tally

[Jens Piotrowski SOC]

Why is Artemis selling tally trigger cables that connect to the sub 7 connector on the Transvideos?

 

http://shop.artemis-hd.com/index.php?sid=635b1f62889703a2f749a2246115eabe&cl=alist&cnid=e21b0bfb7807214e3254eb4fc516dd9c

[Mike Germond SOC]

You can trigger Tally on the D-Sub style GPI connector too. I tried it when I couldn't get the loaner Transvideo to tally on the Shadow-V. It didn't work so I gave up because the proper monitor was en route. That doesn't mean it's not an option though.

[Osvaldo Silvera SOC]

Why is Artemis selling tally trigger cables that connect to the sub 7 connector on the Transvideos?

 

http://shop.artemis-hd.com/index.php?sid=635b1f62889703a2f749a2246115eabe&cl=alist&cnid=e21b0bfb7807214e3254eb4fc516dd9c

Hi Jens,

 

That would work if there was a lower stage Tally Out connector on the CineLive. Or I guess I can get a few custom Monitor Y cables made that have an 8 pin on one side and an 8 pin AND a Sub D connector on the other to plug into the J002..... Decisions, Decisions.... Or maybe another monitor all together, The stabilizer expo is just around the corner, who knows what will be available...

 

Another thing that I've wanted for a while would be a NEW Monitor connector... One that would have a coax in it, so it would be one cable with 1 HD line in it and the SD line can be just as before on the smaller pins. This would have to be industry wide, but easy enough I would venture to think. Monitor manufacturers would have to incorporate it in their monitors as well, but boy would it make life simpler.