Hill vehicle mount

[arielmanuelsalati]

Hi guys,

I own a Hill vehicle mont,

unfortunately a grip recently had lost the U-bolts and screws (I respect him,with these f....long days....)

 

where it is possible to find it?

In Europe seems quite impossible to find it in a normal hardware store....

 

 

thanks

 

Ariel

 

 

www.arielsalati.com

[Sanjay Sami]

Ariel, the U-bolts should be really easy to have made at any fabricators.

[arielmanuelsalati]

Ariel, the U-bolts should be really easy to have made at any fabricators.

Sanjay,

thank you. It was just hard to find here in Switzerland....kinf of strange country,only cheese and chocolate :-)

in any case I've found this site http://www.nickstruckparts.com/round.html

 

 

I'll try to order the U-bolts in there.

It is'nt laziness it's ignorance about the right sizes,just to be sure to don't order the wrong items,

any suggestions about the sizes like diameter,width and lenght?

to have to two possibility of the Hill bracket,the big one and the small one.

 

Sorry about my ignorance in it.....

 

 

Ariel

[Sanjay Sami]

The outer diameter of the tube it fits is 48mm (conforming to the speed rail Inch and a Half size)

[arielmanuelsalati]

The outer diameter of the tube it fits is 48mm (conforming to the speed rail Inch and a Half size)

thank you Sanjay btw good job in 'the budapest Hotel' :-)

[Sanjay Sami]

Thank you :-)

[Lawrence Karman]

http://www.mcmaster.com/#u-bolts/=re1snx

 

Or contact Jerry Hill and order another set. It's just not that difficult.

[arielmanuelsalati]

http://www.mcmaster.com/#u-bolts/=re1snx

 

Or contact Jerry Hill and order another set. It's just not that difficult.

thanks Lawrence