Premium Members richard bellon Posted July 30, 2014 Premium Members Report Share Posted July 30, 2014 Hi all I'm thinking about changing top stage of my MK-V for a PRO Donkey box 3/2/1 Is it possible or do u need the upper electronics for it to fit? The post has the 4 screws holes that I think are the same. Quote Link to comment Share on other sites More sharing options...
Premium Members RonBaldwin Posted July 30, 2014 Premium Members Report Share Posted July 30, 2014 Should all be good Quote Link to comment Share on other sites More sharing options...
Premium Members Michael Wilson Posted July 30, 2014 Premium Members Report Share Posted July 30, 2014 I have the MKV with DB2 setup. Works well. I have my jbox tied into the preston mount in front of the stage. This brings the jbox closer to the post. Which makes it nearly impossible for a couple of my larger lemo connectors to go in the jbox post side. Have an adapter made to get it out a little further or get some 90 degree cables if you need. Quote Link to comment Share on other sites More sharing options...
Premium Members Thomas English Posted July 30, 2014 Premium Members Report Share Posted July 30, 2014 It should be fine. You just need an adaptor made for two 15mm bars to come out the front, a C-Spacer for your top of of your post and let the centre cable out and some longer screws. I am sure Ash at MK-V would be more than happy to help. Quote Link to comment Share on other sites More sharing options...
Premium Members richard bellon Posted July 31, 2014 Author Premium Members Report Share Posted July 31, 2014 Tx guys Quote Link to comment Share on other sites More sharing options...
Sam Law Posted October 27, 2014 Report Share Posted October 27, 2014 I have gen 2 electronics on my mk-v nexus, with a db2, so those are at least compatible Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.