Premium Members Jason Glucksman Posted January 13, 2015 Premium Members Report Share Posted January 13, 2015 My AB battery plate has a wire that came undone and I assume it connects to the part on the back plate. Any advice on how I would get this back in? There's no slot for the end to go in, so if it does connect to the back plate, would it need to be soldered on? Quote Link to comment Share on other sites More sharing options...
Premium Members Jarrett P. Morgan Posted January 14, 2015 Premium Members Report Share Posted January 14, 2015 The part on the sled there is a diode to prevent cross-charging. It looks like the pin on the diode snapped off. You should find another one of the same type (probably a Schottky diode) and replace it. Shouldn't be more than 2 bucks. Quote Link to comment Share on other sites More sharing options...
Premium Members Alan Rencher Posted January 14, 2015 Premium Members Report Share Posted January 14, 2015 Jarrett got there first. 1 Quote Link to comment Share on other sites More sharing options...
Premium Members Jason Glucksman Posted January 14, 2015 Author Premium Members Report Share Posted January 14, 2015 Thanks - just ordered one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.