Premium Members Gary Litwin Posted January 16, 2015 Premium Members Report Share Posted January 16, 2015 Hi All, Just wanted to let you know that we (Boland) have a new 7" (16:9 native) DayBrite coming very soon. Anti-reflective, 1500 nts, markers,scopes, great off axis, matte finish, etc. First few models are already in hands of a few sc pros for trial and feedback. Estimated cost in low $2K range. Pix attached. If you have any questions please let me know.....? Best, Gary 1 Quote Link to comment Share on other sites More sharing options...
Premium Members Walter F. Rodriguez Posted January 16, 2015 Premium Members Report Share Posted January 16, 2015 What is the resolution of the screen? Please make sure the screen has a zoom function! 10% at a time is best. Quote Link to comment Share on other sites More sharing options...
Premium Members Alan Rencher Posted January 16, 2015 Premium Members Report Share Posted January 16, 2015 Is there a web page up with specs yet? Quote Link to comment Share on other sites More sharing options...
Premium Members Gary Litwin Posted January 16, 2015 Author Premium Members Report Share Posted January 16, 2015 i haven't posted it to our site quite yet, but if you email me I can send you the prelim spec sheet. I say prelim because we will be making some changes based on user feedback. It does have zoom, peaking filter, false color, waveform and vector and audio meters (and small built in speakers), and will do cross conversion SDI to HDMI and HDMI to SDI; selectable color temps, RBG and gamma curve adjust , etc Quote Link to comment Share on other sites More sharing options...
Premium Members Rob Vuona SOC Posted January 16, 2015 Premium Members Report Share Posted January 16, 2015 Great to hear Gary, Will it have Tally as well, ? Quote Link to comment Share on other sites More sharing options...
Premium Members Chris Loh Posted January 16, 2015 Premium Members Report Share Posted January 16, 2015 Specs look great! How much will it weight? Quote Link to comment Share on other sites More sharing options...
Premium Members Gary Litwin Posted January 17, 2015 Author Premium Members Report Share Posted January 17, 2015 Yes, tally is already on board :-) Weight? To be completely honest, I sent both units out for eval so I can't weigh it right this sec (my apologies). According to some early (last week) user feedback, it's pretty light. As soon as I get one back in, I promise I will hand - weigh it and let you know. Quote Link to comment Share on other sites More sharing options...
Premium Members Frederic Chamberland Posted January 17, 2015 Premium Members Report Share Posted January 17, 2015 Does it have a fan ? I sold my Boland at the time because of this. It was very intense. Great screen for sure . Built quality was there also. Quote Link to comment Share on other sites More sharing options...
Premium Members Alan Rencher Posted January 17, 2015 Premium Members Report Share Posted January 17, 2015 What connector does it use for tally? Is it a phone connector like some of the other monitors? Quote Link to comment Share on other sites More sharing options...
Premium Members Michael Desiderio Posted January 17, 2015 Premium Members Report Share Posted January 17, 2015 digital horizon option? Quote Link to comment Share on other sites More sharing options...
Premium Members Gary Litwin Posted January 18, 2015 Author Premium Members Report Share Posted January 18, 2015 Tally is through GPI (which has a connector kind of like a phone connector as mentioned above. And definitely no more fan...back light is LED We are still looking at the possibility of some kind of digital horizon but it's not onboard yet Quote Link to comment Share on other sites More sharing options...
Premium Members Alan Rencher Posted January 18, 2015 Premium Members Report Share Posted January 18, 2015 Great, I have all the right stuff to make tally cables for this monitor! Quote Link to comment Share on other sites More sharing options...
Premium Members Martin Stacey Posted January 18, 2015 Premium Members Report Share Posted January 18, 2015 Bonded glass or plastic? I have been looking at the Transvideo Rainbow HD but have been reluctant to invest in an easily scratched screen after past experiences. Also is it water reseistant (not going to die in an unexpected downpour)? Quote Link to comment Share on other sites More sharing options...
Premium Members Gary Litwin Posted January 18, 2015 Author Premium Members Report Share Posted January 18, 2015 Hi Martin, We are not bonding at all on this one....so you have pure LCD. On the picture above, you may note 4 screw holes on the front of the cabinet. We are going to offer glass that can be easily mounted and or removed as you see fit....either for production reasons or as needed for replacement. This monitor is not waterproof...although ....I do have a friend in Florida that dropped our 8" DayBrite in salt water, completely submerged, and to our shock, after rinsing and drying it was fully functional :-) That being said, we suggest that our units should be kept as dry as possible Quote Link to comment Share on other sites More sharing options...
Premium Members Jens Piotrowski SOC Posted January 18, 2015 Premium Members Report Share Posted January 18, 2015 The Rainbow HD has a glass front with AR but not bonded. Bonded glass or plastic? I have been looking at the Transvideo Rainbow HD but have been reluctant to invest in an easily scratched screen after past experiences. Also is it water reseistant (not going to die in an unexpected downpour)? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.