Jump to content
Michael Winokur

FS: Proline Raven Stabilizer - gimbal, arm, vest, case, extras

Recommended Posts

I'm selling my Proline Raven stabilizer. I bought this and did some practice with it but never used it on a production. It's essentially been sitting in the studio. The system shows some marks from setting it up and practicing but otherwise it's in excellent condition. The bad news for me is I have a bunch of money tied up in this. The good news is I learned enough about Steadicam to know to hire and work with a great operator on the film I directed last year.


Included in the sale (everything in the pictures except monitor, battery and c-stand).

- Proline Raven Sled - capable of flying up to an Alexa.

- Proline Vest (modified with M2 buckles http://www.ratchetingbuckles.com/for more precise fitting)

- Proline Arm with 2 sets of springs for flying everything from DSLR up to fully loaded Alexa.

- Custom cut hard case from http://www.mycasebuilder.com/

- Original fasteners from the vest that I took off to change the buckles



- Red Epic Lemo to Sled Lemo power cable

- Monitor XLR to sled Lemo power cable

- Redrock Microremote base station to sled Lemo power cable


Supports 12v and 24v Lemo power with up to 3 batteries

Dual SDI cables in center column




Top Stage

The easily attachable Top Stage embodies a dovetail plate and head regulation to deliver dynamic balance. By utilizing state of the art fore/aft and side by side controllers you can adjust weight distribution effortlessly.


Featuring carbon fiber, 7075 aluminum and swiss bearings the Gimbal is a super smooth system. With a tool-free clamp mechanism smartly positioned it will not interfere with the operators hand placement. Perfect for beginner and advanced steady cam operators.


For maximum stability Proline Steadycams feature a 2” wide, 3 section carbon fiber post. Fully extendable up to 160cm – great for high mode and low mode.


Extremely versatile, the sled can be configured for cameras weighing 1 to 45 pounds (including accessories). It is compact, strong and lightweight with a 12 and 24 volt power supply, and analog video and HDSI signal for monitors. Only 8 pounds in weight, made from high quality materials the modular design can be easily modified, upgraded and maintained.

J Box

Featuring a video amplifier, 12 and 24 volt power, lemo pin 0 and 1 b connectors, the J Box delivers premium HDSDl and HD video signal.

Battery Mount

Designed for V-MOUNT batteries, Proline’s Battery Mount provide an independent 12 and 24 Volts outlets to accommodates additional accessories such as a video recorder, Follow focus, 3 axis guimbals, etc. With Proline’s new ballhead system the Battery Mount can be configured to carry (in multiple combinations) a maximum of 3 batteries at a time and can accommodate a wide selection of cameras.




MSRP of this system without cables or case is over $12,000.

Asking $6000 including case and ground shipping in continental USA

Located in San Francisco

PM me with questions or offers

no warranty no returns









Share this post

Link to post
Share on other sites