Jump to content

Recommended Posts

  • Sustaining Members

I'm selling my whole system as a complete package and not parting it out. It will be available by the beginning of November. It is easier to list everything by the case, so here goes:

CASE #1 Calzone Sled Case

GPI Pro Donkey Box Gen III, GPI Pro HD Upper Junction Box, GPI Pro Telescoping HD Post, GPI Pro MDR Dovetail T Bracket, XCS Ultimate Gimbal, GPI Pro Lower Junction Box, Pro Battery Rack Gen III with 3 Jumper Blocks, Pro Post Wrench, XCS Gimbal Wrench, Pro 3" Hand Grip (low mode), Jerry Hill Docking Bracket with 2 Docking Clamps, Anton Bauer Battery Plate to 4 Pin Cannon, CABLES: 2 X 12v Arri to Pro, 2 X Moviedom to Pro, 1 X Sony Video to Pro, 1 X 4 Pin Cannon to Pro (aux video pwr), 1 X Panavision 2 Pin to Pro, 2 X Panavision 3 Pin to Pro, 3 X 24v Arri to Pro, 1 X Red to Pro,

CASE #2 Pelican 1650

1 X Garfield Vehicle Mount, 1 X 12" Camera Plate, 1 X 9" Camera Plate, 2 X 7" Camera Plates, 1 X Sony Camera Plate, 1 X 6" Pro Arm Post with Collar, 1 X 8" Pro Arm Post with Collar, 1 X 12" Pro Arm Post with Collar, 1 X 12" Low Mode J Bracket Assembly with Collar, Assorted Screws, 1 X Antler to Camera Plate Bracket, 1 X Antler Riser, 4 X Brass Antler Weights, 3 X 15mm Rods for Camera Plates,

CASE # 3 Pelican 1650

1 X Anton Bauer TM4 Battery Charger with Cable, Various BNC Connectors, Bebob Zoe-eng Zoom Control for Cannon Zooms, Bartech Utility Zoom Control Box, 2 X Heydan Motor Cables, 1 X Pro 3 Pin Pwr to Bartech Utility Zoom Cable, 1 X Pro 4 Pin Pwr to Bartech Utility Zoom Cable, 1 X 2&1/4" gear for Hayden Motor, Libec ZC-9 Zoom Control For Cannon Zooms,

CASE #4 Pelican 1650

10 X Anton Bauer HC Dionic Batteries

CASE # 5 Pelican 1650

Preston MDR 2 Motor Driver, MDR Dovetail Mount Bracket, Preston Microwave Transceiver, Preston FIZ Hand Set, Preston FIZ Transmitter, 2 Short Transmitter Antennas, I Short Receiver Antenna, 1 X Remote Iris Control with 8; Cable & Scale Plate, 2 x DM2 Motors with Pam Brackets, 5 X Various Pitched Gears, 2 X Spare Motor Gears, 8 X Focus Scale Rings, 1 X Iris Scale Plate, 1 X Pam Offset Extension, 2 X 15mm Pam Arms, 2 X 5/8 Pam Arms, 1 X Hill Variable Arm, 2 X 3' 15mm Rods, 1 X 15mm Bridge Bracket, 2 X Preston Batteries, 1 X Preston Charger with Cable, 1 X Omnishot Preston Battery Adapter, 1 X Omnishot High Capacity Battery, 1 X Omnishot Standard Capacity Battery, 2 X Omnishot Chargers, CABLES: 1 X Pro Pwr to Preston, 1 X 4 Pin Cannon Pwr to Preston, 3 X 3 Pin Arri Pwr to Preston, 2 X Panavision Pwr to Preston, 2 X Arri 3 Pin Run, 1 X Arri 11 Pin Run, 1 X Red Run, 1 X Sony Run, 1 X Panavision Run, 2 X Preston Motor Cables, 1 X Preston Hard Wire Cable

CASE #6 Pelican 1650

Cinitronic Steadicam Monitor Gen II, Cinitronic Monitor Yolk, GPI Pro Monitor Bracke, GPI Pro 4" Monitor Extender, CABLES: 3 X Pro Pwr to Monitor, 2 X 5' 75ohm Mogami BNC Jumpers, 2 X 5' 75ohm Spagetti BNC Jumpers, 3 X 7' 75ohm Mogami BNCs, 1 X 20" 75ohm Mogami BNCs, 3 X 24" 50ohm BNCs

CASE # 7 Pelican 1600

Modulus 3000 Transmitter with Antenna, 2 X Sony Receivers with Pwr Cables, i X CIT Antenna, CABLES: 2 X Aaton Pwr to Modulus, 2 X Panavision Pwr to Modulus, 1 X Arri 3 Pin Pwr to Modulus, 1 x Arri 11 Pin Pwr to Modulus, 2 X Pro Pwr to Modulus, 1 X 4 Pin Cannon Pwr to Modulus

BAG # 1

GPI Pro Vest, GPI Pro Titan Arm, 2 X Black Canisters, 2 X Blue Canisters,

Arm Bag,

Canister Bag with 2 additional Blue Canisters,

Steadicam 2 Stage Stand with 8" Pneumatic Wheels

email me for more info and photos at markcoyne60@gmail.com

post-15848-0-81482500-1440007356_thumb.jpg

post-15848-0-67511600-1440007374_thumb.jpg

post-15848-0-76023300-1440007387_thumb.jpg

post-15848-0-18222900-1440007410_thumb.jpg

post-15848-0-29879100-1440007432_thumb.jpg

post-15848-0-22812500-1440007455_thumb.jpg

post-15848-0-14951300-1440007479_thumb.jpg

post-15848-0-72678200-1440007666_thumb.jpg

post-15848-0-27431600-1440007833_thumb.jpg

post-15848-0-09069100-1440007944_thumb.jpg

Link to comment
Share on other sites

  • 3 months later...
 Share

×
×
  • Create New...