Premium Members Brian Nordheim Posted September 1, 2015 Premium Members Report Share Posted September 1, 2015 Anybody able to rewire the cinetronics level to work with the Small HD monitors Quote Link to comment Share on other sites More sharing options...
Premium Members Jens Piotrowski SOC Posted September 1, 2015 Premium Members Report Share Posted September 1, 2015 it will not work or communicate with anything other than the Cinetronic Gen2 Quote Link to comment Share on other sites More sharing options...
Moderators Alec Jarnagin SOC Posted September 1, 2015 Moderators Report Share Posted September 1, 2015 What Jens says. The box is the sensor (which is external so you can mount it by the center post). Much of the brains of it are built into the monitor (similiar to the way GPI used to do it with their green screen). Quote Link to comment Share on other sites More sharing options...
Premium Members William Demeritt Posted September 1, 2015 Premium Members Report Share Posted September 1, 2015 The Cinetronics Digital Level is incompatible with other monitors much in the same way that computer hardware isn't always compatible with operating systems or specific software. The level is not open source, it doesn't use any standard data for the monitor to interpret and then display on screen. The interaction between the hardware within the CDL and the software running the Gen 2 monitor is specific to the Gen 2 monitor only. The CDL is just an IMU inside the case; the monitor is what interprets the data the IMU is spitting out. Quote Link to comment Share on other sites More sharing options...
Premium Members RonBaldwin Posted September 2, 2015 Premium Members Report Share Posted September 2, 2015 Decaf Will...decaf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.