Jump to content

NYC - Upgraded Ultra1 Sled that is HD/SDI, New Ultra2 Gimbal, HD Monitor, 3rd battery plate, IDX Batteries/Charger, and Camwave Tx/Rx- Asking $12,000


Recommended Posts

  • Premium Members

I am regretfully selling my amazing starter sled, the Ultra 1. I am selling because I recently upgraded to a more powerful rig to eventually get the artemis trinity setup. I also am expecting a baby boy in april so I need to make some room! I bought this sled from James Baldanza a few years back and it has been nothing but great. I am looking to get $12,000 for the sled (and hard case), a steadicam stand, IDX Battery Charger, (7) E-HL9s IDX Batteries (one of which charging lights doesn't work anymore), a bunch of cables, and I am throwing in the IDX Camwave HD/SDI wireless transmitter which even though you don't see around anymore still works in a jam.

 

The sled was recently serviced by Tiffen, I have had it upgraded with an HD/SDI line, as well as changing out the old gimbal to the new steadicam ultra 2 gimbal. There is a third battery plate on the bottom of the sled, and has three different options for battery placement for power. This sled is a super post (27" to 71") so it can go super high mode or super low mode very quickly and easily. It still has the fore/aft - left/right top stage wireless trim control which is one of the few sleds that still has this amazing option. The tilt stage works like a wonderfully and maintains dynamic balance regardless of where you want to angle the camera. I bought an HD/SDI wondland monitor to replace the super bright monitor from Tiffen because it was an older SD monitor and I wanted the HD. It is a cheaper monitor, but works wonderfully and I have rarely had a problem with the light. It can be powered off the sled or with an IDX battery on it's back.

 

This setup also comes with three camera plates (two long and 1 short), three posts (12", 3.5" and 5"), the ultra 1 low mode handle which has been upgraded to work with this ultra 2 gimbal, a 12V power cable, arri alexa power cable, a few BNC cables, the redbyte decimator downconverter (for use with Tiffen superbright as a backup), cables for the decimator made by konash, and also power cables for MDR2 and MDR3 systems.

 

 

Please feel free to call or email with any questions.

 

Devin Ladd

860-237-0754

devinmladd@gmail.com

 

 

post-13784-0-44734600-1451770026_thumb.jpg

post-13784-0-01288200-1451770061_thumb.jpg

post-13784-0-79639700-1451770099_thumb.jpg

post-13784-0-64122600-1451770132_thumb.jpg

post-13784-0-12450700-1451770166_thumb.jpg

post-13784-0-46675000-1451770205_thumb.jpg

post-13784-0-61499600-1451770240_thumb.jpg

post-13784-0-09104000-1451770282_thumb.jpg

post-13784-0-75699500-1451770339_thumb.jpg

post-13784-0-78178700-1451770371_thumb.jpg

post-13784-0-70189300-1451770576_thumb.jpg

post-13784-0-95129800-1451770604_thumb.jpg

post-13784-0-34779900-1451770712_thumb.jpg

post-13784-0-08649400-1451770758_thumb.jpg

post-13784-0-34699300-1451770795_thumb.jpg

  • Upvote 1
Link to comment
Share on other sites

  • 3 weeks later...
  • 2 months later...
  • 3 weeks later...
  • 1 month later...
 Share

×
×
  • Create New...