Premium Members Hajin Rhim Posted June 8, 2016 Premium Members Report Posted June 8, 2016 Can someone explain to me why this is happening? I tried powering the decimator md-hx to a different power source and it still happens. Quote
Premium Members Hajin Rhim Posted June 8, 2016 Author Premium Members Report Posted June 8, 2016 Nevermind, it was just the screen turning off. But I still can't get a signal to my boland bvb07 through my sdi on my pro cinelive sled...so I'm trying to tinker with the decimator md-hx. Quote
Alejandro E Fuenmayor Posted August 4, 2017 Report Posted August 4, 2017 i use a lanparte battery/HDMI splitter. it gives me 2 cdmi outs i take one to feed a parallinx transmitter, the other goes to hdmi to composite and I send that signal down my master to monitor. there is a small delay when doing that. Quote
Tim Sutherland Posted August 4, 2017 Report Posted August 4, 2017 (edited) Make sure that the hdmi out on the a7 is set to 1080 instead of 4k or something else. I had that problem when I first plugged it in. Sent from my Nexus 5X using Tapatalk Edited August 4, 2017 by Tim Sutherland Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.