allan14 Posted September 29, 2016 Report Share Posted September 29, 2016 I'm looking to make up a cable for Sony OB cameras (1500/2500/4300) to output the tally through the tracker connector to the tally in/ out on the rig. Does anyone have a picture or details for the wiring of the tally in/ out connector on the Shadow V50 rig? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
RobinThwaites Posted September 30, 2016 Report Share Posted September 30, 2016 Hi Alan Your Shadow V should have the same 4 pin Lemo as the M-1, wiring can be found in the on-line manual http://www.tiffen.com/userimages2/Steadicam/2015_Steadicam_Price_Lists/M1_manual_LIT-815000_sm.pdf Please note that this is an active circuit designed to power the Tiffen tally sensor so is a little more complicated than just a through connection, if you are in the US a call to the factory would be a good idea. Also I suggest you change your identity to your full name, this forum is pretty hot on that :-) Robin Quote Link to comment Share on other sites More sharing options...
allan14 Posted September 30, 2016 Author Report Share Posted September 30, 2016 Hi Robin, Thanks for your reply. I found the tally cable you mentioned and managed to get it to work, however it isn't sending tally to the monitor via the accessory cable. I've been through the monitors settings but still can't get it to work. Cheers Allan Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.