Jump to content

Recommended Posts

Tiffen Steadicam Archer 2 Rig - Location: Los Angeles - Orange County
Manufactured 10/2009 - purchased 1/2010 from Tiffen in Glendale

-Sled: Archer 2 sled with dovetail plate, Anton Bauer gold mounts (Will thrown in VMounts sled came with - NOT adapters. VMounts require installation) and stock Tiffen 16x9 analog SD monitor with frame generator. Post also wired for HD. 12V or 24V DC output. Non-Motorized tilting stage.

-LX Vest: pads dry cleaned, just sent to Tiffen to replace over-belly plastic piece (which looks like carbon fiber but isn't).

-G50 arm - With 15lb sled ( 2x battery weight included), payload approximately 35lbs.

-Archer 2 docking bracket

-(3) Hex Wrenches: 1/4", 3/16", 5/32"

-Original Operation Manual

-Thermodyne Case (all above items fit in case)

-(4) Anton Bauer Dionic HC batteries - in great shape each holding 3 hour charge.

-A/B Titan 2 charger. Charges 2 batteries simultaneously. 4pin XLR MF cable and mode switching allows charger to also function as 12v AC power supply

-American stand

-25lb Sandbag


-Tiffen Vehicle Hard Mount - High-Hat base (not the Mitchell). Comes with socket block mountable to either side for Righty or Goofy.

-Archer2 Low Mode bracket ("F" Bracket) - to keep arm from whacking camera when operating in low-mode

-VLS - Brant Fagan's awesome low mode camera mounting bracket.
Mounts camera upside-down so sled can be inverted for low-mode.


Most of my cables have been sold, but I have these.

Red Camera Power Cable: 3pin M Lemo (to stage) to 6pin M Lemo (to Original RED).

4Pin XLR F ENG Camera Power to 3pin M Lemo (to stage)

Decimator 2 Power cable to 3 pin Lemo -

4 pin Herose Male to 6Pin Herose Male for Modulus SD transmitter.

Tiffen Tally Lights for rig.

Will Throw-in Steadicam Operator's Handbook, Edition 2



If Interested, PM Me at steadicampaul@gmail.com









Share this post

Link to post
Share on other sites