Looking for allen bolt for old Pro 1 Grip

[Rory_Moles 0]

Hi I have an older Pro grip which has an allen bolt to tighten it. The allen key socket was rounded off so I asked our local Pro agent to replace it. They have replaced it with a 9/64 allen bolt, but I need a 5/32 allen bolt as otherwise i need to carry around two allen keys. I had no luck with Pro (Out of date model) does anyone know where I can get a 1/2" long #8 UNF bolt with a 5/32 socket cap, as all I can find is the same standard bolt size (9/64 cap and #8 UNF)

I may need to get a bolt made by a machinist (the bolt I had looked to be home made) but hoping someone has a source

 

best

 

Rory in London

[Jens Piotrowski SOC 199]

McMaster.com

[Rory_Moles 0]

Hi Jens thanks but on McMaster every length of 8-32 bolt comes with a standard 9/64 cap

[Jens Piotrowski SOC 199]

Talked to Jack at PRO?

[Rory_Moles 0]

Yes no more stock

 

Rory

[Rick Woollard 1]

Hey Rory,

 

I've got spares, give me a ring

 

Rick

[Rory_Moles 0]

Hi Rick thanks for thinking of me, I have to shout out a massive thankyou to Jens Piotrowski who dug out a new old stock screw from his treasure trove and sent it to me over the pond. What a gent ! Fitted it yesterday, beautiful.

 

Rory