Jump to content

Modified Ultra 1 sled, Transvideo HD6 & accessories


Recommended Posts

  • Premium Members

Tiffen Ultra 1 sled

Long and short Tiffen dovetail plates

Tilting top stage(upgraded bolts and brace)

HDSDI down the post (Terry West)

Long nose section cut down, connectors replaced with HDSDI BNC, 12/24V 3 Pin 0B Lemo and 0B 12V Lemo (same polarity as Arri/Teradek/Preston etc).  Back of the top stage still has 2 x 12/24V 2B Lemo and Hirose 12V

Original 4 stage integrated ‘super post’ 

Gimbal upgraded with Ultra 2 latch and just serviced and balanced by Robert Luna.

Bottom K section removed and rewired with custom 3D Printed Case (Allen Rencher) with switch, LED, HDSDI, 3 x Lemo 2B 12/24V power connectors for batteries, 0B Lemo 12/24V and Hirose 4 pin

12/24V power from two V-mount plates

Accessory dovetail plate for Tiffen 3rdBattery mount

2 x V-mount to Anton Bauer battery plates

Low mode bracket

Hill docking rings top and bottom

Gorelock 2 balancing/docking bracket with tilt function

Gorelock 2 docking bracket for cart

Power cable Lemo 2B to 12V 4 pin right angle XLR power cable (brand new)

 

Transvideo HD6(blue knob, 1000Nits) with Virtual Horizon, Scopes etc on Cam Jam yoke (6.5mm) and rod.  Note you will need a Cam Jam Quattro Monitor arm to complete this sled. Already have the custom derlin collar to fit.  Comes with 3 pin Lemo power, Hirose power cables and two composite to 8 pin cables.

 

Custom Inner Space flight case you can drop the whole built sled in.

 

Very versatile sled and served me well for years on TV and features, now moved to M1/Volt.

Los Angeles

$10,500 or best offer

 

Ultra - 15.jpg

Ultra - 16.jpg

Ultra - 11.jpg

Ultra - 12.jpg

Ultra - 13.jpg

Ultra - 14.jpg

Ultra - 8.jpg

Ultra - 9.jpg

Ultra - 2.jpg

Ultra - 7.jpg

Ultra - 6.jpg

Ultra - 4.jpg

Ultra - 5.jpg

Ultra - 3.jpg

Ultra - 10.jpg

Ultra - 1.jpg

Link to comment
Share on other sites

  • 4 weeks later...
  • 5 months later...
 Share

×
×
  • Create New...