Jump to content

GPI PRO Sled gen2


Recommended Posts

  • Premium Members

Hi all sorry for delay been hectic.

 

The rig is in good condition been cared for by only me since inception and was never dry hired.I serviced the rig myself as sending it overseas never made sense this includes the gimbal bearings that I cleaned and lubricated from time to time .They are still very smooth .I replaced the grub screws on post with the new nylon ball and that made a huge difference.There is a few wear marks on the groove when you extend post because of metal screws which now is nylon balls, but nothing to worry abaot.I don't have any cables as I'm keeping them for my other rig.I can include 1 camera plate.There are 2 5amp spare fuses and 2 10amp spare fuses I never needed to replace them but wanted them in case.There is a spare DB3 side to side bolt.I replaced the SD cable to SDI so new connectors ob post cable and upper and lower junction boxes , there is now a SDI out on lower junction box.This rig is amazing and I'm actually not that keen to sell so if you are very serious contact me otherwise don't bother.There are some pics that will take you to we transfer.

 

Best

Adi

https://we.tl/t-yBf1Cb9p0O

 

 

  • Upvote 1
Link to comment
Share on other sites

  • 3 weeks later...
×
×
  • Create New...