Sustaining Members Aaron King Posted May 29, 2019 Sustaining Members Report Share Posted May 29, 2019 A question for Pro users who have adopted the M1 Volt gimbal and have been using a Pelican 1650 case. I've been using a 1650 case for the past several years and have it set up with two levels. The bottom I keep the Pro Arm, monitor and additional canisters. The top level I have the sled, docking bracket and additional plates. My question is, with the new thickness of the gimbal, have you been successful in still utilizing the 1650, or did you find yourself needing something deeper to compensate for the new dimensions and still have room for all your components? Thanks. Quote Link to comment Share on other sites More sharing options...
Sustaining Members JOSEPH B. HERNANDEZ Posted June 4, 2019 Sustaining Members Report Share Posted June 4, 2019 Unfortunately due to how thick the new gimbal is you need all the depth the case has. maybe you could have just one half of the case be able to have another level. Here is a picture of the insert I had done. But I carry my arm and vest in a separate Pelican 1650. Quote Link to comment Share on other sites More sharing options...
Omar Guinier Posted January 2, 2020 Report Share Posted January 2, 2020 Joseph, that a clean looking case man, can i ask who cut it for you? Quote Link to comment Share on other sites More sharing options...
Freddie Whitman Posted January 23, 2020 Report Share Posted January 23, 2020 (edited) Joseph do you keep your arm and vest in the same 1650? If so, would you be able to post a picture of the insert for that setup? Much appreciated. Edited January 23, 2020 by Freddie Whitman Quote Link to comment Share on other sites More sharing options...
Sustaining Members JOSEPH B. HERNANDEZ Posted March 4, 2020 Sustaining Members Report Share Posted March 4, 2020 Innerspace Case in Los Angeles makes all my cases. I keep my vest and arm in a separate 1650 case it’s lined with carpet and foam for the lid. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Jordan Collalto Posted September 3 Report Share Posted September 3 On 5/29/2019 at 1:23 PM, Aaron King said: A question for Pro users who have adopted the M1 Volt gimbal and have been using a Pelican 1650 case. I've been using a 1650 case for the past several years and have it set up with two levels. The bottom I keep the Pro Arm, monitor and additional canisters. The top level I have the sled, docking bracket and additional plates. My question is, with the new thickness of the gimbal, have you been successful in still utilizing the 1650, or did you find yourself needing something deeper to compensate for the new dimensions and still have room for all your components? Thanks. Hi Aaron, I'm curious if you found a way to tetris this case together as you had it setup before with two levels? I might be trying to tackle the exact same setup soon so I'd love to hear if you found a successful method. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.