Werner Juergen Heinemann 3 Report post Posted June 13, 2019 I am currently starting a show with the DXL2. I have a Master Series, and am having trouble lining up the camera plate to the body. The only way I was able to mount it was with the bridge plate (pic bellow). While the sled flies well, it would be GREAT to be able to ditch the BP and go right to the camera. As it's making my sled quite long. Any advice as too where I could get a camera plate that would fit a Master (obviously different than the original plate) would be greatly appreciated. Thank you. Quote Share this post Link to post Share on other sites
Mathew Cree 0 Report post Posted June 15, 2019 I ran into this problem a lot with my ultra plates, so I just drilled a hole the correct spacing for the camera in one of my plates. Not ideal, but it definitely worked for me anyway. It wasn’t for a dxl 2 but I’m guessing it has the same spacing as a red or mini. (Could be wrong) Matt Quote Share this post Link to post Share on other sites
Matthias Biber 20 Report post Posted August 10, 2019 Have a look at the cam-jam.de railway plate system. It has a very universal hole pattern for all cameras. Some new mounting options for the Alexa and the Alexa mini. Quick change to studio mode. Quote Share this post Link to post Share on other sites
Werner Juergen Heinemann 3 Report post Posted August 10, 2019 Giving it a look now. Thank you! Quote Share this post Link to post Share on other sites
