Premium Members BJMcDonnell SOC Posted December 8, 2019 Premium Members Report Share Posted December 8, 2019 Hey guys and gals, I had a question that may have already been answered here somewhere. Does anyone have a technique or tip for making a rain cover for the volt gimbal? I have a commercial and we have rain planned on Tuesday. I just wanted to know what people may have done for rain. Post your pics if you have any. Thank you. BJ McDonnell Quote Link to comment Share on other sites More sharing options...
Premium Members Alan Greene Posted December 9, 2019 Premium Members Report Share Posted December 9, 2019 I recently ran into some discussion on this and wish I remembered where I saw it. The recommendation was this: https://www.bhphotovideo.com/c/product/1249877-REG/ruggard_rc_fc714_fabric_rain_shield_small.html I just ordered one myself and hope to never use it. 1 Quote Link to comment Share on other sites More sharing options...
Premium Members BJMcDonnell SOC Posted December 10, 2019 Author Premium Members Report Share Posted December 10, 2019 Thank you Alan! Quote Link to comment Share on other sites More sharing options...
Lisa Sene Posted December 10, 2019 Report Share Posted December 10, 2019 Hi BJ, So far I've only used a Volt in the rain once. We covered it with cut up cap-its draped over the Volt with some excess hanging down over the sides to give the water somewhere to go. We were diligent about drying it off between takes, and going under cover while everything was reset (we were on an E-car doing a stunt scene). Held up great, though we were careful about paying a lot of attention to keeping it dry. Would love to hear what others have done! Lisa Quote Link to comment Share on other sites More sharing options...
Premium Members Guille Moreno Posted December 13, 2019 Premium Members Report Share Posted December 13, 2019 I’ve used the rain cover for the bottom section of the arm, and it worked pretty well. Because it’s open all along one side with velcro it was easy to wrap around the Volt Quote Link to comment Share on other sites More sharing options...
Premium Members Rob Carlson Posted April 1, 2020 Premium Members Report Share Posted April 1, 2020 Hi. I make a rain / dust cover for Volt it’s waterproof and easy on easy off. No Velcro I can make either operating side and 1.5 and 2” posts. If you’re interested I can make you one. Reply or text 847.343.7255 All the Best. Stay well cheers Quote Link to comment Share on other sites More sharing options...
Premium Members Alexander Aji Posted February 13 Premium Members Report Share Posted February 13 https://www.bhphotovideo.com/c/product/1249877-REG/ruggard_rc_fc714_fabric_rain_shield_small.html Quote Link to comment Share on other sites More sharing options...
Premium Members Bob Beresh Posted February 15 Premium Members Report Share Posted February 15 On 2/13/2023 at 6:43 PM, Alexander Aji said: https://www.bhphotovideo.com/c/product/1249877-REG/ruggard_rc_fc714_fabric_rain_shield_small.html This guy knows his affordable rain and dust solutions! Looking forward to trying the gaiters on my arm. This camera cover might be just the ticket for a sled lower cover as well. Quote Link to comment Share on other sites More sharing options...
Premium Members Loren Hamilton Posted June 22 Premium Members Report Share Posted June 22 (edited) I have a fully weather-kitted sled w/ Volt weather goodies from Rob Carlson and they’re great. I highly recommend. He also made some custom ones for an AC friend’s Hi-5/monitor setup, so let him know what you need. Edited June 22 by Loren Hamilton Quote Link to comment Share on other sites More sharing options...
Premium Members Gus Trivino Posted June 24 Premium Members Report Share Posted June 24 On 4/1/2020 at 6:47 PM, Rob Carlson said: Hi. I make a rain / dust cover for Volt it’s waterproof and easy on easy off. No Velcro I can make either operating side and 1.5 and 2” posts. If you’re interested I can make you one. Reply or text 847.343.7255 All the Best. Stay well cheers Hi Rob, do you have some pics ? Best to all, Gus Quote Link to comment Share on other sites More sharing options...
Premium Members Rob Carlson Posted June 24 Premium Members Report Share Posted June 24 Hi Gus, 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.