Jump to content

How to Use a Garfield Mount


Recommended Posts

Hi Everyone, 

I am new to steadicam, have flown a Pro Rig a number of times and just purchase one of my own. I bought the full kit from a long time operator and there a lot of things in it that I'm learning about, one being the Garfield mount. 

I finally figured out what it was and was curious as to how it is used/mounted. I own a truck and want to test it out. 

Any tips or references are greatly appreciated!

 

Thank you, 

 

Logan

Link to post
Share on other sites

It’s two pieces bolted together (as you no doubt already know). The base is Mitchell mount for hi-hats/dollies/risers/basically anything on most sets. The piece with the socket block on it can also be mounted on speed rail with the u-bolts in the kit (or from a hardware store). It’s not a complicated thing to do but I’d advise against doing it by oneself unless you have done it a few times and/or someone  has walked you through properly rigging the mount etc. — lots of things can go wrong without a solid base and disaster can ensue and gear can be lost as well as people injured. Definitely don’t go out in your truck (or any vehicle) without a safe solid mount, a good safety harness for you, and a driver who knows how to handle a vehicle with your life (and your life savings) hanging off the back.
 

it’s usually not used as often as one would think (especially nowadays with all the stab heads and gimbals) but it’s a godsend when ya need it. 

Edited by RonBaldwin
  • Like 3
Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...