unscrewed gimbal please help.

[Andrew Lukas]

Hello.
I would like to check the bearing in the Artemis schatler1.5 gimbal but I have a problem with unscrewing the bearing cover.
If anyone knows how this part is unscrewed, please information . (picture below)

 

[Cedric Autier]

Hello Andrew,

There is nothing special to unscrew it, but it could be locked with some loctite or something similar.

I was able to unscrew mine by warming it with a hair dryer, than pressing the upper cap on a non-slip table surface, and twisting the gimbal grip.

It is actually the lower part with the grip that will unscrew from the bearing assembly.