Premium Members Hervé Colosio Posted May 16, 2006 Premium Members Report Share Posted May 16, 2006 does someone know how to remove this button on my master series ? a little disc that stop the top stage to go right or left have been broken . i have now a 0.5 mm of move right and left on the top stage . to replace this i need to remove the red button . there is a little screw in it , i have remove it , but the button still in place . any help will be very appreciated . Quote Link to comment Share on other sites More sharing options...
Dean_Zhong Posted May 17, 2006 Report Share Posted May 17, 2006 Hello! After u remove the little screw,you must to pull it use definite strength Quote Link to comment Share on other sites More sharing options...
Mikael Kern Posted May 17, 2006 Report Share Posted May 17, 2006 Hello!After u remove the little screw,you must to pull it use definite strength As I remember it there is a pin that goes through the rod. Like a safety pin. You need to find a small solid pin of the same size and tap out the safety pin. Be gentle. Mikael Kern Quote Link to comment Share on other sites More sharing options...
Premium Members Hervé Colosio Posted May 17, 2006 Author Premium Members Report Share Posted May 17, 2006 thats it , thank you for your help . it's the secured small pin who was very difficult to remove . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.