Premium Members Jarrett P. Morgan Posted June 11, 2021 Premium Members Report Share Posted June 11, 2021 While I was out of town a couple of folks asked for one, so I also have another run done of the Volt cheeseplate. This is a slight redesign that makes it both lighter and puts holes on the bottom of the volt (or top if you flip it around) to mount things to. It has two arri pin 3/8s in the standard 50mm spacing as well as 1/4-20 holes in the standard 9/18mm spacing used by Arri, smallrig, and the like. I use one to mount a low mode monitor on. The anodized black pictures are the new version. The old pictures are there to give examples of things to mount. The cheeseplate will included 4 stainless steel mounting screws. Price is 80 USD plus shipping. Anodizing color may be slightly different. Please let me know if you have any questions! Link to comment Share on other sites More sharing options...
Recommended Posts