Jump to content

Volt powered 24V


Emanuele Chiari
 Share

Recommended Posts

  • 4 months later...

As far as I have found out as long as the cable isn’t set for 24v power it shouldn’t pass through. I have 12/24v set up on my clipper 2 and it will only power 24v if the cable is wired for 24v. You can see if the cable is by simply removing the lemo connector and checking which cable is where. There should be an open port that is for 24v. But to double check it wouldn’t hurt to take a volt meter to the power ports and check 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...