Jump to content

Cartoni Lambda Head For Sale

Recommended Posts

  • Premium Members

Great working condition and  great looking, as well-  AND  A GREAT RENTAL .

I own two-( Got a kid going to college- God help me)

Nodal, and all the "off the wall" camera angles, are all the rage these days- thanks to the new handheld gimbals- ( Movi/ Ronin/ Trinity)  

This Cartoni  head allows you to put the Camera lens anywhere you want including a full 360 degree Nodal- (Getting Dizzy -just thinking about it)

The difference, from the  sometimes scary three axis gimbals, mentioned above( that have , no doubt given,  some operator's othondontist some work)- is ,  the Cartoni Lambda Head gives you  full control from the dolly, camera slider,  tripod-- or any mounted mitchell  base plate. It has a pay load  capacity of over  66 lbs ( try that on your gimbal)

They Kit includes The Lambda Head (Serial # LM 0480) Three Handles, including a telescopic handle, Castle Nut,  Quick Start Diagram, and a Custom Innerspace, rolling case.

(Tripod not included)

This kit retails at over 19,000.00

Asking  $10, 879.00



Here are the specs from Cartoni :


Cartoni Lambda Nodal Overview

The Lambda is a "Nodal Swing Head" ideally suited for 35mm film cameras fully equipped with long lenses, matte-box and extra large magazines. 
Designed to provide a high level of operational flexibility, this fluid head can be easily fitted to a wide range of supports like tripods, dollies, cranes and camera cars. 
The head comes equipped with a standard Mitchell flat base. Available as an option, a 150mm ball base, two balancing counterweights and a third axis to roll the camera 360° sidewise.

The mounting can be inverted for low line lens positioning allowing the camera to be moved all the way to the ground and provide for accurate images which normally cannot be obtained with other traditional fluid heads.
With the Lambda, there is no need to change or disassemble a variety of additional platforms or risers to suit the optical center of the camera. Simply adjust the center of gravity by turning the two independent wheels which are easy to reach and smooth to operate; the vertical sliding platform will immediately rise or lowered with a precise positive movement and considerable time saving.
The balance system is designed so that camera swings on its own center of gravity and rotates 360° on its vertical axis.
No springs or similar counter reaction elements are required to set the head in a fixed tilt position allowing both pan and tilt movements to have identical feel. The lens focal distance can be kept constant by choosing the suitable camera position with its relevant sliding plate.
The Lambda employs the patented fluid drag control system on both pan and tilt modes allowing the damping levels to range from "0" for freewheeling to "7" for maximum drag.







Link to comment
Share on other sites


  • Create New...