Jump to content

ARRI TRINITY with some extras for sale

Recommended Posts

  • Premium Members

Hi everyone

As I have moved on to the Trinity 2, I am selling here my Trinity (1) with quite a few extras. A couple of notes upfront, the head has been checked and serviced last week at FOMA and all calibrations and values are factory reset. The Rig has obviously cosmetic wear but is fully functional. It also has all the available upgrades done (24V upgrade, quicklock upgrade (head), pendulum upgrade).

List of items that will come with the package.

  • 1 x ARRI Trinity Head
  • 1 x ARRI Trinity Joystick
  • 1 x Transvideo ARRI Starlite 5" monitor (with extra power cable for external use)
  • 1 x ARRI Trinity joystick
  • 1 x ARRI Starlite monitor mounting bracket
  • 1 x ARRI Trinity joystick main cable
  • 1 x ARRI Trinity joystick > Starlite monitor powercable (5pin Lemo angled > 5pin Lemo straight)
  • 1 x ARRI Trinity/Artemis 1.8" post with fine adjustment
  • 1 x ARRI Trinity/Artemis 1.8" gimbal
  • 1 x ARRI Trinity/Artemis gimbal handle extension
  • 1 x ARRI Trinity/Artemis knurled gimbal extension for low mode
  • 1 x ARRI Trinity/Artemis post tool
  • 1 x ARRI Trinity/Artemis docking bracket
  • 1 x ARRI CSS stabilizer plate
  • 2 x ARRI Trinity 18mm battery plate connection rods (to obtain the triangle formation)
  • 1 x ARRI Trinity/Artemis post extension (gives you another 21 cm of extra post length)
  • 1 x set of Trinity power cables (lower sled)
  • 4 x Goldmount battery plates (the basic ARRI package includes only three, I'm throwing in one extra plate)
  • 1 x cam power cable, Trinity > ARRI Alexa Mini, Mini LF, Amira 12V
  • 1 x cam power cable, Trinity > ARRI Alexa, Alexa LF, etc. 12V/24V (2pin Fischer)
  • 1 x cam power cable, Trinity > RED DSMC2 cameras (6pin Lemo) 12V
  • 1 x cam power cable, Trinity > 4pin XLR 12V
  • 1 x external power cable to power the Trinity head (d-tap > 4pin Lemo)
  • 2 x Belden 60 cm BNC cables in bundle (they are set up to be used in a most efficient in combination with most camera packages in the head)
  • 1 x Optical Support 3D printed Headlock (to lock the head in the tilt axis, this item is damaged but still usable and functional)
  • 4 x Optical Support 3D printed bumpers (to protect the sides of the head base)
  • 1 x Optical Support 3D printed wishbone (to lock or limit the roll axis)
  • 1 x Lenovo tablet with Windows10 and USB cable to connect to the head through the FOMA software
  • 1 x Peli Air Case 1615 with custom fit foam inlay for the Artemis post
  • 1 x Peli Case 1780 with custom fit foam inlay to transport the Trinity Rig with minimum disassembling (custom design)

Few other notes: The head itself will come in a custom fit foam inlay in a box, but without a case! You will need to buy that case (SKB 3i-2317-14BE). If the buyer wishes, I can put the whole rig into the Peli Case 1780, but shipping might become very costly like this and I wouldn't recommend shipping the Trinity as assembled as it would be. The stand visible in the pictures is not included in the package.

Sale within the EU will be preferred!! Buyer pays money transaction fees and shipping fees.

Price: 38000 € EUR (plus taxes if you're based in Germany)

For further questions and details shoot me a message.




Edited by Osman 'Ozzy' Oksuz
Link to comment
Share on other sites

  • Osman 'Ozzy' Oksuz changed the title to ARRI TRINITY with some extras for sale
  • 2 weeks later...

  • Create New...