Premium Members Dave Wowchuk Posted July 30, 2006 Premium Members Report Share Posted July 30, 2006 I was just reading the June 2006 issue of American Cinematographer, and there's a picture of Greg Smith operating in low-mode on Poseidon ... and it appears that his yoke is upside down. Which "bracket/widget/handle" would he have used to allow that? Dave Quote Link to comment Share on other sites More sharing options...
Moderators Alec Jarnagin SOC Posted July 30, 2006 Moderators Report Share Posted July 30, 2006 Most of them. Standard F or D bracket or any of the new angled ones. Quote Link to comment Share on other sites More sharing options...
Premium Members Eric Fletcher S.O.C. Posted July 30, 2006 Premium Members Report Share Posted July 30, 2006 I was just reading the June 2006 issue of American Cinematographer, and there's a picture of Greg Smith operating in low-mode on Poseidon ... and it appears that his yoke is upside down. Which "bracket/widget/handle" would he have used to allow that? Dave That's the way you do it. Using something like this Quote Link to comment Share on other sites More sharing options...
Premium Members Dave Wowchuk Posted August 1, 2006 Author Premium Members Report Share Posted August 1, 2006 Thanks Alec & Eric. I've seen that bracket, but wasn't sure how it worked. I'm assuming that your arm posts have a small hole in them to allow for the locking pin? I know mine doesn't have one, so that's what threw me off. Do you normally use longer "inverted" arm posts, or just the standard one? Quote Link to comment Share on other sites More sharing options...
Premium Members Afton Grant Posted August 1, 2006 Premium Members Report Share Posted August 1, 2006 The posts I own and have seen don't have holes. They have a groove running around the circumference of the post which secures it within either the block or the gimbal handle. Similar to a padlock. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.