mark viducich Posted March 3, 2007 Report Share Posted March 3, 2007 looking for a non-operational anton bauer battery to use for adding weight to the bottom of my flyer will pay freight to california Link to comment Share on other sites More sharing options...
Premium Members Dave Wowchuk Posted March 4, 2007 Premium Members Report Share Posted March 4, 2007 EBay usually has a bunch of people selling dead ones for re-celling. Try there first if you haven't already. Dave Link to comment Share on other sites More sharing options...
mark viducich Posted March 4, 2007 Author Report Share Posted March 4, 2007 of course i tried there first was even looking for a cheap operational battery on ebay that is why i figured i would try here as the same fellow selling one for recelling would probably be a guy from this forum Link to comment Share on other sites More sharing options...
Premium Members Erwin Landau Posted March 4, 2007 Premium Members Report Share Posted March 4, 2007 Hi Mark, Try BVG - Broadcast Video Gear, they have a shit load of b-stock and used or for consignment equipment and they are resellers for Anton Bauers. They had a stack of dead batteries last time I came by... talk to Mimi and tell her I send you (The Yugoslavian steadicam operator from Switzerland): 1-800-224-0509 1-818-841-4800 1-800-842-5111 Also try BandPro again an Anton Bauer reseller, they have a bunch of display batts sitting around. Talk to David Jones or David Rosner: 1-818-841-9655 Good Luck, Erwin Link to comment Share on other sites More sharing options...
mark viducich Posted March 7, 2007 Author Report Share Posted March 7, 2007 wanted to extend a sincere thanks to erwin as i was able to get a non-working battery for the cost of freight from bandpro Link to comment Share on other sites More sharing options...
Niall povey Posted March 18, 2007 Report Share Posted March 18, 2007 looking for a non-operational anton bauer battery to use for adding weight to the bottom of my flyer will pay freight to california while you are are at it why not wire the second batt connecter up so it works and you wil the get double the time before needing to change batts Link to comment Share on other sites More sharing options...
Recommended Posts