Premium Members Nestor Salazar Posted August 9, 2007 Premium Members Report Share Posted August 9, 2007 (edited) Hello everybody. My name is Nestor Salazar. Am a new operator from Sweden. Am gonna finally purchase my first rig :D and I been looking for an arm. I have seen one but I heard thats something wrong with it. I just dont now how much problem that is. I have attached some pics for you to look at. Hope you guys can see in the middle of the picture, inside the springs. like something is stuck. My question is - Is this a problem / can it be fixed, were and how much will it cost.?? Ive heard that they have tested it and it works fine. But it makes a clocking sound when you boom up or down.!! - Another question that I have is how much this arm carries.?? As far as I now its a master arm.?? Hope somebody can Answer my questions. Kind Regards Nestor Salazar Manriquez Edited August 9, 2007 by Nestor Salazar Quote Link to comment Share on other sites More sharing options...
Premium Members RobVanGelder Posted August 9, 2007 Premium Members Report Share Posted August 9, 2007 Looks like a collar from a spring got dislocated, it scratches against other parts and also I see a strange curve in the spring........ I suggest a serious check by an experienced operator and then very likely a good check/repair at Tiffen. This might be not the only thing wrong with it, depending on the age. This Master arm can have other issues as well (hair-cracks) 1 Quote Link to comment Share on other sites More sharing options...
Premium Members Jerry Holway Posted August 9, 2007 Premium Members Report Share Posted August 9, 2007 Nestor- The scratched part looks like a Delrin (plastic) collar/guard and guide that should be clamped around the chome ring on the right of your pix. It's a pain to do this, BTW, so I suggest you contact Hofmann Technik and have someone there take a look at it. Most likely it's not a big deal, but since someone used it like this, it should be examined, along with the springs, cables,... well, everything. I suspect you have an arm that lifts between 40 and 65 lbs (20 - 45lbs "payload" with a 20 lb sled). The curve in the spring is probably from the collar being displaced and the arm collapsing more than normal. Jerry 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.