Premium Members Denny Kortze Posted December 2, 2007 Premium Members Report Share Posted December 2, 2007 For Sale: PRO 1 Sled, 3A Arm and 2 Channel Bartech remote focus, everything you need minus the vest. PRO 1 Sled: Sled Hardcase/shipping case Modular 51 softcase Transvideo Cinemonitor IIIa Superbright with anti-reflective coating and Transvideo frameline generator, spirit level bracket, raingear and pelican case. It has been converted to Lemo 8 wiring. Perfect condition, only used 3 or 4 times. XCS monitor bracket with extra long 11 inch rods. PRO Gimbal (older style with hex adjustment) PRO Upper J-Box PRO D box PRO 1 Battery Base 12v/24v with on-board recorder plate PRO 2-Stage centerpost Preston MDR bracket Arm: Cinema Products 3a Gold Spring arm upgraded by Rob Luna about a year and a half ago. In excellent condition, one of the nicer 3a arms around. 4?, 8? and 10? Arm posts PRO J-Bracket PRO Docking Bracket Matthews Double Riser Stand Vehicle mount with socket block for a Mitchell plate 9? Dovetail Plate 7? Dovetail Plate 6? 19mm rod for plate 4? 15mm rod for plate Cables: Arri, Sony, Panasonic 12V power cable (4 pin XLR connector) Arricam LT, ST, Arri 235, 435, 535 24v Power Cable Panavision Gold, Platinum 24V Power cable BNC jumber cables in various sizes (75 ohm HD compatible Mogami 2964 and Belkin mini) Batteries: Pelican Case for Batteries and charger 14 PRO 1 batteries, many of them were recelled about a year ago and have not been used much, I can usually get about 6 or 7 mags on an Arricam before I need to change them. 2 of the batteries are non-working but you could probably have them recelled and working again. Pag Micromaster Charger Pag Dual Micromaster Charger (I have been having some problems with this, one side of the charger does not seem to be working reliably so I have only been using it as a single charger). Bartech 2 Channel Remote Focus: Pelican 1500 Case Bartech BFD Focus Transmitter w/ antenna BFD Receiver w/ antenna Bartech BFD Iris Transmitter w/ antenna BFD Receiver w/ antenna Heden Focus Motor w/ cable and 6 gears (0.8,0.8,0.4,0.4,0.5,0.6) and 2 rod inserts FMG-6 Focus Motor with cable and 4 gears(0.4,0.5,0.6,0.8) and 3 rod inserts 2 Channel Transmitter Bracket 2X Pro to BFD cable Pany 10-pin run cable 3X Arri RS Run Cable Arri BL/SR Run Cable Arricam 3-pin power cable with 24-12v downconverter BFD to BFD Power 5 Hard Plastic Focus Rings 4 Soft Plastic Focus Rings w/o Bartech $32,500 w/ Bartech $38,500 (discounted with package) No vest is included in the package, but you have everything else you need to get started including a reliable remote focus system. The package is located in New York City, please email or call with any questions or if you would like to check it out. I will post pictures in the next week or so once I have the time to do so. Denny Kortze 917-232-0452 dkcamera1@yahoo.com Link to comment Share on other sites More sharing options...
Recommended Posts