Premium Members Stuart Howell Posted April 18, 2008 Premium Members Report Share Posted April 18, 2008 PRO 4 piece post upgrade / conversion w/ Gimbal & Monitor Bracket 4 Piece Carbon Fibre 2" Post/Gimbal/Monitor Bracket Comprises: ? 2" 4 stage carbon fibre post 21" - 72" (built in super-post) ? MK-V V2" Advanced Gimbal ? MK-V V2" telescopic monitor arm in PRO mount ? PRO Junction Box ? Jerry Hill 'Gorelock II' docking bracket with 2 docking rings. Designed to totally replace the PRO post system from the donkey box/topstage down to the lower J-Box, or be used as a basis for a new sled (add topstage, monitor and battery base). It can be swapped over for the PRO post in minutes and on set, or as a permanent replacement : remove the 4 screws on the base of the post system and the 4 screws that hold the topstage, then swap the post system over, re plug the new cable and re-bolt. Slightly longer than PRO post fully collapsed (about 1"). Selling with Gorelock II docking bracket and two rings. Just add donkey box, monitor and battery base for a complete rig. (Compatible with any PRO or MK-V components) Extremely good condition and used only occasionally as back-up / additional rig ! Whatever your thoughts about MK-V, this does work very well ! Post assembly new from MK-V is over $14,000 / ?8900 / £7000 Asking $9000 / ?6000 / £4500 + shipping. I also have a mint condition PRO Donkey Box II available for $2500/?1575/£1250 PRO Vest/Harness (very good condition) also available for $3000/?3800/£1500 If anyone wants everything, I'll throw in the original PRO / Anvil vest flight case for shipping. Please email if you need any more pics or information. Located London (UK) but can ship anywhere. Stuart Howell Camera/Steadicam Operator mail: stuhow at mac.com Link to comment Share on other sites More sharing options...
Premium Members John Ford Posted April 19, 2008 Premium Members Report Share Posted April 19, 2008 Will the Pro Donkey Box II fit a 1 1/2" post? Thanks. John PRO 4 piece post upgrade / conversion w/ Gimbal & Monitor Bracket4 Piece Carbon Fibre 2" Post/Gimbal/Monitor Bracket Comprises: ? 2" 4 stage carbon fibre post 21" - 72" (built in super-post) ? MK-V V2" Advanced Gimbal ? MK-V V2" telescopic monitor arm in PRO mount ? PRO Junction Box ? Jerry Hill 'Gorelock II' docking bracket with 2 docking rings. Designed to totally replace the PRO post system from the donkey box/topstage down to the lower J-Box, or be used as a basis for a new sled (add topstage, monitor and battery base). It can be swapped over for the PRO post in minutes and on set, or as a permanent replacement : remove the 4 screws on the base of the post system and the 4 screws that hold the topstage, then swap the post system over, re plug the new cable and re-bolt. Slightly longer than PRO post fully collapsed (about 1"). Selling with Gorelock II docking bracket and two rings. Just add donkey box, monitor and battery base for a complete rig. (Compatible with any PRO or MK-V components) Extremely good condition and used only occasionally as back-up / additional rig ! Whatever your thoughts about MK-V, this does work very well ! Post assembly new from MK-V is over $14,000 / ?8900 / £7000 Asking $9000 / ?6000 / £4500 + shipping. I also have a mint condition PRO Donkey Box II available for $2500/?1575/£1250 PRO Vest/Harness (very good condition) also available for $3000/?3800/£1500 If anyone wants everything, I'll throw in the original PRO / Anvil vest flight case for shipping. Please email if you need any more pics or information. Located London (UK) but can ship anywhere. Stuart Howell Camera/Steadicam Operator mail: stuhow at mac.com Link to comment Share on other sites More sharing options...
Premium Members Eric Fletcher S.O.C. Posted April 19, 2008 Premium Members Report Share Posted April 19, 2008 Will the Pro Donkey Box II fit a 1 1/2" post? Yes it will Link to comment Share on other sites More sharing options...
Moderators Alec Jarnagin SOC Posted April 20, 2008 Moderators Report Share Posted April 20, 2008 If you need a battery base for this set up, I'm selling a Jerry-Rig battery base. http://www.steadicamforum.com/forums/index...ost&p=35205 Thanks Link to comment Share on other sites More sharing options...
Premium Members Stuart Howell Posted April 20, 2008 Author Premium Members Report Share Posted April 20, 2008 Hi John, Yes, as Eric said, just attaches using 4 screws straight into the PRO J-box or similar. Post size doesn't make any difference. Stuart Link to comment Share on other sites More sharing options...
Recommended Posts