Premium Members Marco Dardari Posted February 5, 2009 Premium Members Report Share Posted February 5, 2009 I'm myself shrewed that if I align the markers of the clamps with the yellow lines of the three sections of the post, the stage and the electronic module is disaligned. I can in some way to correct this gap? Every suggestion is appreciated thanks Marco Quote Link to comment Share on other sites More sharing options...
Richard James Lewis Posted February 5, 2009 Report Share Posted February 5, 2009 I once noticed this with a Clipper 2 sled. There is nothing you can really do yourself as far as I am aware. The aluminum plugs are glued and pinned, so it's not a user adjustment. If the marks on the lower post align the monitor properly with the lower electronics, then you might be able to get away with having Tiffen just replace the top post section with a correctly orientated plug for the top stage attachment. The middle and the lower post would be fine as they are. I could of course be wrong, and there may be an adjustment in the lower electronics housing where the post mates, but then that would mean that the monitor bracket would be off alignment. Either way, let Tiffen know, I'm sure they would sort out ot for you. Best of luck. Rick. I'm myself shrewed that if I align the markers of the clamps with the yellow lines of the three sections of the post,the stage and the electronic module is disaligned. I can in some way to correct this gap? Every suggestion is appreciated thanks Marco Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.